Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Fort Washington
If your chimney is showing crumbling mortar at the crown, a damp stain on the ceiling below, or a flue that no longer vents the way it should, chimney repair in Fort Washington starts with a diagnosis, not a sales pitch. We work on the older fireplaces and clay-tile flues that fill this township, and we show you camera footage of what we find before anyone recommends a repair. Call (866) 861-1187 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fort Washington Homeowners Call Chimney Sweep Rhawnhurst for Chimney Repair
Fort Washington is not a new-build town. Most of the chimneys here sit on detached single-family homes built from the 1920s through the 1970s, many still carrying their original brick and clay-tile liners. That matters when something goes wrong, because the repair has to match an older stack rather than a modern prefab unit. Chimney work is all we do. We are not a general handyman company that sweeps a chimney on the side, so our technicians have up to 15 years of experience on exactly this kind of masonry and flue system.
We serve homeowners across Fort Washington and know the difference between a mid-century ranch off Bethlehem Pike and the older stone and stucco houses near the historic village core. When you call, we can talk through what your house type usually needs. Every visit starts with a camera inspection and a photo report you keep. The local professional who performs the work is licensed and insured as Pennsylvania requires, and your price is set per job by a written estimate before any repair is booked.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Fort Washington
Full-spectrum chimney work means one call covers the sweep, the cap, the crown, the liner, and the masonry. Here is what we do most in Fort Washington, and how each repair actually goes.
Mortar Repointing
In Fort Washington’s older brick chimneys, the mortar joints above the roofline take the worst of the weather. Repointing means cutting out the failed mortar and packing in fresh material so water stops tracking into the brick behind it. A typical mortar repointing job in Fort Washington runs $350 – $900 depending on how high the chimney sits and how much joint length has let go. We repoint before we ever suggest a rebuild, because most stacks do not need one.

Spalling Brick Repair
Spalling is brick that has absorbed water, frozen, and popped its face off, and the freeze-thaw cycles here push it along on any chimney shaded by the dense tree canopy. We replace the spalled units and address the moisture source so the new brick lasts. A typical spalling brick repair in Fort Washington runs $500 – $1,500, sized to how many courses need replacing. The camera and photo report show you which bricks are failing and why.

Chimney Waterproofing
Waterproofing puts a breathable sealant on the masonry so it sheds rain while still letting trapped moisture escape. On a Fort Washington chimney that sits damp through a humid summer, this is often the difference between mortar that lasts and mortar that crumbles again in a few winters. A typical waterproofing job in Fort Washington runs $250 – $600. This is the repair we recommend most often as a follow-up to repointing, and we say plainly when it can wait a season.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and when it pulls loose or rusts through, water runs straight down the stack into the attic and ceiling. In Fort Washington, flashing repair commonly runs $300 – $800. We check the flashing on every repair visit because a leak that looks like a chimney problem is often a roof-to-chimney seal that failed.
When the damage goes deeper, our chimney repair team handles full rebuilds, tuckpointing, and liner installation with the same camera-first approach.
Trusted Brands We Service in Fort Washington
We install and work with professional-grade materials that certified chimney pros specify, including DuraFlex and HeatShield liner systems, Olympia Chimney components, and Gelco and Famco products. That range means we are not locked into one repair method. HeatShield lets us resurface a damaged flue in place, and DuraFlex covers a full relining when the original clay tile is beyond saving. The same lineup serves annual maintenance and major structural work, so a sweep that turns up a problem does not send you hunting for a second contractor. Call (866) 861-1187 and we will tell you which approach fits your chimney.
Common Chimney Repair Problems We See in Fort Washington Homes
The biggest local driver of chimney damage here is not the weather alone. It is the canopy. Dense oak, maple, and sycamore trees off Bethlehem Pike and Susquehanna Road drop leaf litter and windthrow branches that pack caps and crowns, and squirrels and birds routinely nest in uncapped flues. Spring calls in Fort Washington often start as wildlife evictions before any masonry work begins. Here is what that produces on the older homes here:
- Cracked clay-tile liners. Freeze-thaw cycles split the tile and the cracks go unnoticed until a Level 2 camera inspection reveals gaps that let creosote and moisture reach the surrounding masonry.
- Spalling crowns and mortar joints. Original brick crowns and joints crumble from summer dampness followed by winter freezing, and the canopy shade keeps chimneys wetter longer.
- Uncapped flues full of nesting material. Debris sitting against a warm flue blocks draft and raises the chimney fire hazard, especially on wooded streets where squirrels and birds move in.
- Undersized or unlined flues serving newer appliances. A stack built for an open fireplace may not vent a modern insert or furnace safely, so the camera check comes before a new appliance goes in.
In Fort Washington’s mature wooded lots, a typical repair call starts with a homeowner noticing a damp spot or crumbling mortar at the crown after a freeze-thaw winter. A qualified local pro runs a Level 2 inspection with a camera to check the clay-tile liner for cracks and the smoke chamber for creosote, then usually finds spalling brick and deteriorated joints that need repointing and waterproofing rather than a full rebuild. If the flue is unlined or undersized, the fix is often a HeatShield or DuraFlex liner sized to the firebox and venting load, with the footage shown to you before any work is authorized.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Fort Washington, PA
Repair costs in Fort Washington track the older housing stock and the local labor market. These are typical estimated ranges, and the written estimate sets the final price.
| Repair | Typical range in Fort Washington |
|---|---|
| Mortar repointing | $350 – $900 |
| Spalling brick repair | $500 – $1,500 |
| Chimney waterproofing | $250 – $600 |
| Flashing repair | $300 – $800 |
| Liner installation (HeatShield or DuraFlex) | $1,800 – $4,500 |
| Partial to full rebuild | $3,000 – $10,000+ |
What moves the number is height, access, how much masonry has failed, and whether the flue needs relining. Nothing is recommended without camera evidence you can see for yourself, and we tell you plainly when a repair can safely wait. Estimates are free.
We Also Serve Cities Near Fort Washington
We take the same camera-first approach in the towns around Fort Washington. Homeowners in McKinley, Rockledge, Cheltenham Village, and Olney call us for the same older masonry and clay-tile flues, and we handle their sweeps, caps, liners, and rebuilds the same way. If you are just outside Fort Washington, call and we will confirm coverage for your address.
Serving Fort Washington, PA – Our Local Coverage Area
We serve Fort Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Fort Washington
Yes. A camera inspection is the only way to know what shape that clay-tile flue is in before anyone quotes a repair. Fifty-plus years of freeze-thaw cycles crack the tiles, and the cracks hide behind the flue wall where you cannot see them. We run a Level 2 inspection, show you the footage, and let the evidence set the scope. Call (866) 861-1187 – estimates are free.
Because repointing fixes the joints, not the crown, and the crown is what sheds water off the top. If the crown is cracked, water keeps soaking the masonry below and the new mortar fails again. The fix is a crown repair or recast plus waterproofing so the whole stack dries out between storms. Call (866) 861-1187 and we will look at the crown and the joints together.
A properly fitted chimney cap with a screen is the right fix, plus removing the nesting material so the flue drafts correctly. Uncapped flues under the oak canopy here invite squirrels and birds every season, and the debris left behind blocks draft and raises fire risk. We evict, clean, and cap in one visit. Call (866) 861-1187 to book it before the heating season.
It can be either, and only an inspection tells you which. A cold flue drafts slowly on the first fire of the day, but smoke that keeps spilling points to a blocked flue, a damaged liner, or a stack that is undersized for the firebox. We check all three with the camera before recommending anything. Call (866) 861-1187 – estimates are free.
Third-degree creosote is the glazed, hardened layer that a standard sweep cannot remove, and it needs professional treatment rather than brushing. It shows up as a shiny, tar-like coating inside the flue, and a camera inspection confirms how far it runs. We assess it and explain your options before quoting a repair. Call (866) 861-1187 to schedule the inspection.
Book Your Fort Washington Chimney Repair
From annual sweep to full liner rebuild, one call covers it all. We diagnose before we quote, use professional-grade DuraFlex, HeatShield, Olympia Chimney, Gelco, and Famco materials, and show you the camera report so you decide with real evidence in hand. Protect your home from the flue up. Call (866) 861-1187 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Rhawnhurst.