Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fort Washington
Most of the chimneys we look at in Fort Washington are older than the people living in the houses. That’s not a knock on the homeowners. It’s just the reality of a wooded Montgomery County suburb where the housing stock runs from the 1920s through the 1970s. The cap on top of those chimneys – the metal or masonry lid that keeps rain, animals, and debris out of the flue – usually doesn’t last as long as the chimney itself, and the crown, the sloped concrete layer where the chimney meets the sky, takes a beating from every freeze-thaw cycle. When one or both fail, the result isn’t cosmetic. It’s water in the chimney chase, nesting material in the flue, and eventually cracked tile or spalled mortar that costs a lot more to fix than the cap would have. If your cap is missing, rusted through, or the crown has visible cracks, call us at (866) 861-1187. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fort Washington Homeowners Call Chimney Sweep Rhawnhurst for Chimney Cap & Crown
We’re a chimney specialist, not a general handyman who sweeps on the side. That matters when the job is a cap or crown on a 1950s brick chimney with clay-tile flues and masonry that may not be square anymore. Every technician on the team lives and breathes chimney work. Our technicians have up to 15 years of experience, and what they’ve learned about older Fort Washington masonry can’t be found in a general contractor’s playbook.
We work with professional-grade materials – Olympia Chimney, Famco, Copperfield, DuraFlex – the same brands certified chimney professionals specify nationwide. That means when we install a custom cap on a home off Bethlehem Pike, we’re not cutting corners with a universal lid that won’t seal properly. We diagnose before we quote. Nothing gets recommended without camera evidence you can see yourself, and we stand behind every cap and crown installation with a satisfaction guarantee.
We serve Fort Washington regularly, so we know the road layout, the wooded lots, the way older homes near the historic village core differ from mid-century builds further out. When you call, we can tell you what to expect before we’re there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fort Washington
Cap work and crown work are separate jobs, and they mean different things for the life of your chimney. Here’s what each covers and what typically matters for Fort Washington homes.
Cap Installation
A chimney cap is the first line of defense for your flue. It keeps rain from coming straight down onto the crown and into the flue, and it stops nesting material from piling on top. Under the mature oak and maple canopy that covers so many lots along Susquehanna Road, an uncapped flue fills fast – leaf litter, twigs, and whatever the squirrels drag in. We match the cap to your actual flue geometry rather than forcing a one-size lid onto a 1920s clay-tile chimney. Olympia Chimney and Famco caps are among the product lines we install.

Cap Replacement
An existing cap that’s rusted through, bent, or missing a screen isn’t protecting anything. Replacing it is usually the simplest fix on these older chimneys, but the measurement matters. A cap that doesn’t sit flush on the crown doesn’t do its job. We check the crown condition first – if mortar is crumbling underneath, installing a new cap over a failing crown won’t hold.

Crown Repair
The crown is the sloped concrete surface that sheds water away from the chimney walls. When it cracks, water gets in. On mid-century Fort Washington brick homes, the original crowns are often showing spalling from repeated freeze-thaw cycles – the concrete cracks, then a hard freeze pushes pieces loose. A typical crown repair in this area runs $350 to $750, depending on the size and condition of the crown. We rebuild the slope properly so the water actually moves off, not just patches the surface. Left alone, a cracked crown lets water into the chimney chase and behind the flashing, and that’s when the repair cost jumps.

Crown Coating
Not every crown needs to be rebuilt. When the mortar is sound but the surface has surface-level hairline cracks, a crown coating can extend the life of the existing structure. We use HeatShield ceramic coating for crown resurfacing because it bonds to the masonry and gives you an option before committing to a full crown rebuild. Crown coating in Fort Washington typically runs $250 to $450 for a single flue.
Trusted Brands We Service in Fort Washington
We install and work with Olympia Chimney, Famco, Copperfield, and DuraFlex products. These aren’t the cheapest items on a truck. They’re the materials that professional chimney technicians specify on jobs where the homeowner is going to see whether the cap fits right and whether the crown holds through wet winters and hard frosts. We don’t stock a warehouse – each cap is sized for the flue count and dimensions on your chimney. That means a slightly longer turnaround than a generic bolt-on lid, but you get a cap that actually covers the flue and a crown that drains water the way it’s supposed to. For a custom flue setup on a Fort Washington stone or stucco chimney near the historic village core, this matters.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Fort Washington Homes
- Missing or rusted caps on uncapped clay-tile flues. Under the oak canopy that covers so much of Fort Washington, an uncapped chimney is essentially a collection bin for nesting material and leaf litter. Before the first fall fire, that debris load can restrict draft and create a real carbon monoxide risk if the flue vents a gas appliance.
- Spalled and cracked mortar crowns on mid-century brick chimneys. The typical Fort Washington home built between 1920 and 1970 has the original crown. Repeated freeze-thaw cycles crack it, and water gets behind the flashing and into the chimney structure. Cracked tiles often follow.
- Undersized or unlined flues that need relining more than capping. Some Fort Washington homes have fireplaces or appliances venting into stacks that were never designed for modern venting requirements. A cap and crown fix won’t solve that – it needs DuraFlex or HeatShield work. We say so when the camera shows it.
- Squirrel and bird nesting in flues near Bethlehem Pike and Susquehanna Road. Tree squirrels and birds are persistent, and the dense canopy gives them a clear path to your chimney. A spring sweep often turns into a wildlife-eviction job and then a cap install before the heating season starts.
Pricing for Chimney Cap & Crown in Fort Washington, PA
A typical chimney cap installation in Fort Washington runs $250 to $600, depending on flue count and whether a custom cap is needed. Cap replacement is usually in the $200 to $450 range. Crown repair runs $350 to $750, and crown coating is typically $250 to $450 for a single flue. Multi-flue and custom caps sit at the higher end of those ranges. None of these prices include liner work – if the camera inspection shows cracked clay tiles or an unlined flue, that gets quoted separately and only after you’ve seen the evidence. We’ll also tell you plainly when something can safely wait.
The estimate is free and per job. Nothing is billed until you approve the written estimate. Call (866) 861-1187.
We Also Serve Cities Near Fort Washington
We serve homeowners in Fort Washington and the surrounding area. That includes McKinley, Rockledge, Cheltenham Village, and Olney. Same technicians, same materials, same camera-first approach. The housing stock shifts a little as you cross into each of those communities, but the philosophy doesn’t. If you’re on the edge of Fort Washington and not sure whether you’re in our service area, call and we’ll confirm. (866) 861-1187. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Fort Washington, PA – Our Local Coverage Area
We serve Fort Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fort Washington
Because the dense oak and maple canopy along Bethlehem Pike and Susquehanna Road gives squirrels and birds easy access to uncapped flues. A cap with a proper screen mesh stops most of it, but if your existing cap has damaged mesh or no screen at all, nesting material will keep building up no matter how often you sweep. The fix is a properly sized cap with a screen, installed flush to the crown. Call (866) 861-1187 for an exact quote – estimates are free.
In most cases a spalled crown can be repaired rather than fully replaced. We rebuild the crown slope with fresh mortar when the damage is structural, or apply a crown coating with HeatShield when the surface has hairline cracks but the underlying structure is sound. We won’t recommend replacement unless the camera shows damage that warrants it. Call (866) 861-1187 to get it looked at.
You see the photos. We run a camera and document what we find – the crown cracks, the debris load, the condition of the clay tiles – and show you before we make any recommendation. No guesswork, no upsell. If the evidence doesn’t support the work, we say so, and we tell you when it can wait. That’s not a sales pitch; it’s just how we do it.
Yes, it can. A cap over a flue with structural issues won’t fix the draft or water problem – it just covers the opening. If the camera shows cracked or missing clay tiles, the conversation moves from cap work to relining with DuraFlex or HeatShield before the cap goes on. We’ll tell you what the evidence shows. Call (866) 861-1187 for a free estimate.
Yes, and Fort Washington is a good example of why. The chimney sits idle all summer while nesting material, leaf litter, and twigs accumulate in uncapped flues under the tree canopy. A spring sweep clears that debris before it can create a draft restriction or venting problem in fall. If you find wildlife nesting when we inspect, we handle the eviction and cap install as part of the same visit.
If your cap is missing or your crown is cracked, call (866) 861-1187 for a free estimate. We diagnose before we quote, and we don’t recommend anything you can’t see in the photos. The local pros we work with are licensed and insured, and nothing gets billed until you approve the written estimate.
Written by the team at Chimney Sweep Rhawnhurst.