Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Fort Washington, PA
Chimney Sweep Rhawnhurst provides independent DuraFlex service across Fort Washington, PA: cleaning, Level 2 inspection, cap installation, creosote removal, and repair of DuraFlex flexible stainless steel liner systems in wood-burning and gas fireplaces. The one thing that sets our DuraFlex work here apart from a generic sweep is that we inspect before we clean. On Fort Washington’s wooded lots, debris and nesting material pack against the liner top, so a plain sweep doesn’t reach the real problem. Call (866) 861-1187 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fort Washington Residents Choose Us for DuraFlex Service
DuraFlex is a stainless-steel relining brand sold almost entirely through chimney professionals, which means the people who install it and service it see its whole component system up close: insulation wraps, tee and cap fittings, appliance connectors. That installation-level familiarity is what we bring to a DuraFlex-lined Fort Washington flue. It’s how we can tell a loose top plate from a failed tee joint before we quote a thing.
We’re an independent DuraFlex service provider. That’s worth saying plainly. We’re not manufacturer-affiliated and not authorized by DuraFlex. What we are is a single-trade chimney specialist, working alongside brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield because those are the professional-grade materials chimney technicians specify nationwide.
Scheduling is straightforward. You call, we talk through the symptom, and we book a visit. From a routine sweep to a cap repair, one call covers it all. We diagnose before we quote, with no upsells and no guesswork, and we’re clear about when cleaning will do and when relining is actually needed.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Fort Washington
These are the DuraFlex issues we run into most often in Fort Washington homes, and what usually causes them.
- Debris and nesting packed against the top plate. On Fort Washington’s wooded lots, leaf litter and squirrel nesting material collect against the liner top under mature oaks. A quick sweep from above won’t clear it. A camera inspection followed by a proper clean is the only way to know the flue is actually open before heating season.
- Insulation wrap and mesh damage from damp exterior flues. When a DuraFlex liner sits in a damp exterior clay flue, the wrap and mesh can degrade or tear, letting condensation and creosote sit against the masonry. Fort Washington’s humid summers, with flues idle and damp, speed that along.
- Corroded or loosened caps and top plates. The crown area takes the brunt of freeze-thaw cycles here. A top-plate or cap assembly that loosens lets debris and moisture drop straight down onto the liner. Repairing or reseating the cap closes that opening.
- Separated tee fittings and connector joints. Years of heating cycles can work a tee fitting loose, especially behind fireplace inserts in mid-century Fort Washington homes. The symptom is weak draft or smoke drifting into the room.
- Undersized oval liners in original clay flues. Some postwar masonry fireplaces were relined with an oval liner squeezed into an undersized flue. Poor draft and stubborn creosote are the result. Sometimes the fix is a cleaning and cap; sometimes the liner has to be sized properly.
DuraFlex Service in Fort Washington: What Local Conditions Mean for Your Equipment
The tree canopy is the local factor that reshapes how DuraFlex work plays out in Fort Washington. On the wooded streets off Bethlehem Pike and Susquehanna Road, oak, maple and sycamore litter plus storm-driven windthrow fill caps, crowns and flues through the year. Because so many homes pair original clay-tile flues with a capped or uncapped DuraFlex liner, a Level 2 camera inspection often finds debris and nesting packed against the liner top. That makes an inspection-then-clean sequence the recurring pattern here, not a plain sweep.
The housing stock has a lot to do with it too. Fort Washington is largely postwar and mid-century detached single-family homes on large wooded lots, many with original brick masonry fireplaces and clay-tile flues, plus older stone and stucco houses near the historic village core. Between the canopy overhead and the mature masonry below, a DuraFlex flue here needs to be looked at with a camera before anyone decides what the job is.
DuraFlex Models & Products We Service in Fort Washington
We clean, inspect and service the DuraFlex components that make up a finished relining system in Fort Washington: smooth-wall stainless relining kits, oval and round relining lengths, insulation wrap and mesh kits for exterior chimneys, and top plates, caps and tee components. Because DuraFlex is a matched system, using brand-compatible liner, insulation, top plate and tee parts matters; generic substitutes don’t seal the same way and can leave a gap where debris and moisture get in. When a part needs replacing, we choose a quality part that fits the existing assembly rather than forcing a mismatch. If the liner itself is sound and correctly sized, we’ll tell you so. Relining is a recommendation we make only when the flue tiles are cracked, spalled or unlined.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Fort Washington
Pricing depends on what the inspection finds. A straightforward clean on a sound, correctly sized DuraFlex-lined flue costs less than a job that needs debris pulled from behind a top plate, a cap reseated, or a separating tee fitting repaired. A free estimate includes the Level 2 camera inspection and a clear explanation of what we found, so you’re pricing the actual work, not a guess. Where cleaning, cap and crown work is the honest answer, that’s what we’ll recommend. If the flue tiles are cracked or unlined, relining enters the conversation, and we’ll show you why.
- What drives cost: flue condition, liner sizing, whether debris and nesting have packed the liner top, and whether cap or tee repairs are needed.
- What’s included: a camera inspection and a written scope before anything is booked.
Call (866) 861-1187 for a free estimate. The written estimate sets the final price.
Serving Fort Washington, PA – Our Local Coverage Area
We serve Fort Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Fort Washington
Weak draft and smoke into the room usually trace to nesting material or leaf debris packed against the top plate under the oak canopy, or to a separated tee fitting behind an insert. A Level 2 camera inspection finds which one. Call (866) 861-1187 for an exact quote; estimates are free.
Yes, in Fort Washington it often is. Squirrels and birds nest in uncapped flues under the mature canopy through spring, so a spring visit catches the problem before the first fall fire. A fall sweep can find the flue already blocked. Call (866) 861-1187 to book.
Yes, when the clay tiles are cracked, spalled or unlined. We install DuraFlex flexible stainless steel liner with brand-compatible insulation, top plate and tee parts. We’re an independent specialist, not authorized by the manufacturer. Call (866) 861-1187 for an estimate.
Not the canopy directly, but the debris and nesting material it drops can. Leaves and squirrel nesting collect against the liner top and trap moisture, which is what degrades the wrap and top plate. Keeping the cap sealed and inspecting each year is the protection. Call (866) 861-1187 for an exact quote; estimates are free.
It means matching a cap to the flue crown and to the DuraFlex top plate so the connection seals against debris and moisture. On older masonry crowns with spalling mortar, we may need to address the crown too. Call (866) 861-1187 to book an inspection.
Service Areas Near Fort Washington
Alongside Fort Washington, we work across Fort Washington and the surrounding communities, including McKinley and Rockledge, plus Rhawnhurst, Mayfair, Holmesburg, Fox Chase and Northeast Philadelphia. If your home sits under the wooded lots anywhere in this stretch, the same canopy-driven DuraFlex issues apply.
Book Your DuraFlex Service in Fort Washington Today
Chimney work is all we do. From a Level 2 inspection and creosote removal to cap installation and liner repair in Fort Washington, one call covers it. Call (866) 861-1187 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Rhawnhurst.