Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Fort Washington
If your Fort Washington chimney has the original clay-tile flue, a cracked crown, or a fireplace that’s been converted to gas, we handle the whole job: inspection, liner, and rebuild. We work all over Fort Washington, from the wooded blocks off Bethlehem Pike to the older stone and stucco houses near the historic village core, and we know the mid-century chimneys here well enough to tell you what’s actually wrong before anyone quotes a number.
Chimney work is all we do, so we don’t treat a liner or a rebuild as a side job. Our technicians have up to 15 years of experience, and we install professional-grade materials from brands like DuraFlex and Olympia Chimney. Call (866) 861-1187 and we’ll set up a free estimate.
Why Fort Washington Homeowners Call Chimney Sweep Rhawnhurst for Chimney Liner & Rebuild
Fort Washington is a particular kind of place to do chimney work. It’s an old, heavily wooded Montgomery County suburb, and most of the fireplaces we open up sit inside mature single-family homes built from the 1920s through the 1970s. The conditions that shape the trade here aren’t new construction. It’s the dense oak, maple, and sycamore canopy overhead dropping litter and windthrow onto caps, and the old masonry underneath that has spent decades absorbing it.
That’s why we lead with diagnosis. Unlined or original clay-tile flues and deteriorating mortar are where the worst upselling in this trade happens, and we won’t play that game. Nothing gets recommended until we’ve run a Level 2 inspection camera and shown you the footage. You see the cracked tile, the missing mortar joint, the nesting material, the same thing we see. If the flue can safely wait a season, we’ll say so.
Our local professionals are vetted, and the ones we connect you with are licensed and insured as their state requires. We answer 24/7, and our fast dispatch runs from 7am to 7pm, Sunday through Friday. If you’re on a wooded street across Fort Washington and the line is busy, we’ll book you into the next opening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Fort Washington
From annual sweep to full liner rebuild, one call covers it. Here’s what we handle most often in Fort Washington homes.
Stainless Steel Liner
When a Fort Washington flue is cracked, spalled, or simply the wrong size for what’s venting into it, a stainless liner is usually the fix. We size the liner to the appliance, not to the hole, and install an insulated system so the flue stays warm and drafts properly through the heating season. Materials come from brands we trust for the long haul, including Olympia Chimney.
Flexible Liner
Flexible liners let us reline a flue that’s offset or has a bend without tearing into the masonry around it. A lot of the postwar and mid-century chimneys around Fort Washington have a slight jog in the run, and a flexible system handles that cleanly. It’s a good option when the tiles are compromised but the surrounding structure is sound.
Liner Replacement
If an older liner has failed or the original clay tiles have cracked through, a replacement restores the barrier between creosote, heat, and the framing of your house. We pull the old liner, check the flue the whole way down, and put in a new system built for the appliance you actually run. Nothing gets replaced without camera evidence that it needs to be.
Partial Rebuild
For chimneys where the crown is breaking apart or the top courses of brick have spalled from freeze-thaw but the stack below is solid, a partial rebuild takes care of the failing section without tearing down the whole chimney. It’s the right call on a lot of the mid-century Fort Washington homes where the mortar crown has been quietly giving up for years. Where the tiles are sound and it’s the flue surface that’s rough, HeatShield ceramic resurfacing can repair the liner and extend its life instead of replacing it.
Trusted Brands We Service in Fort Washington
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the professional-grade materials specified by certified chimney professionals across the country, and our technicians are authorized to install and work with them. We don’t keep parts in stock and we don’t guess at what’s on hand. We spec the system to your flue and appliance, order what the job needs, and turn it around without cutting corners. That’s the difference between a lining that lasts and a patch that doesn’t. When we’re done, you get documentation of what went in and how.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Liner & Rebuild Problems We See in Fort Washington Homes
- Cracked or spalling clay tiles. Decades of humid summers and cold winters leave the original clay flue tiles in Fort Washington chimneys damp and idle, then freeze-thaw cracks them. Once a tile fails, creosote and heat can reach the surrounding masonry, and that’s when a liner stops being optional.
- Uncapped flues packed with debris. The mature oak and sycamore canopy over the wooded streets off Bethlehem Pike and Susquehanna Road keeps a steady supply of leaf litter and nesting material coming down. Squirrels and birds routinely nest in uncapped flues, so a spring sweep often turns into wildlife removal and a cap installation before the first fall fire.
- Oversized or unlined stacks serving appliances. When a Fort Washington homeowner switches to a gas insert or vents a furnace or water heater into the same chimney, an original stack built for an open wood fireplace is often too big for the appliance. The flue runs cold and damp, drafts weakly, and builds up the very conditions that degrade the tile.
- Failed mortar crowns and caps. Freeze-thaw cycles on exposed crowns and caps drive our spring repair rush in Fort Washington. A spalling crown lets water into the masonry, and windthrown branches off the canopy take out caps and screens that were doing their job.
Pricing for Chimney Liner & Rebuild in Fort Washington, PA
Pricing is set per job by a written estimate, and the estimate is free. To give you a real sense of the Fort Washington market, a typical stainless steel liner runs roughly $2,200 – $4,500 depending on length, diameter, and whether it’s insulated. A flexible liner install tends to land in a similar range, from about $2,000 to $4,200. A partial rebuild on a failing crown or top courses typically runs $1,800 – $4,000, and a full chimney rebuild can run $6,000 and up. Liner repair, including resurfacing, is often the least expensive route when the tiles are sound.
What moves the number is the length and condition of the flue, whether the old liner has to come out, the size and insulation the appliance needs, and how much of the crown or masonry is failing. We diagnose before we quote, so you’re not paying for guesswork.
| Service | Typical Fort Washington range |
|---|---|
| Stainless steel liner | $2,200 – $4,500 |
| Flexible liner | $2,000 – $4,200 |
| Liner repair / ceramic resurfacing | $1,200 – $2,800 |
| Partial rebuild | $1,800 – $4,000 |
| Full chimney rebuild | $6,000 and up |
We Also Serve Cities Near Fort Washington
We also take on liner and rebuild work in the towns surrounding Fort Washington. That includes McKinley, Rockledge, Cheltenham Village, and Olney, and the same mid-century chimneys and heavy tree cover show up across much of that stretch. If you’re nearby and not sure whether you’re in our service area, call and we’ll tell you straight.
Serving Fort Washington, PA – Our Local Coverage Area
We serve Fort Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Fort Washington
You know by looking, not by guessing: a Level 2 camera inspection shows whether the tiles are cracked or spalled, and that decides it. If the tiles are sound and it’s only the flue surface that’s rough, HeatShield ceramic resurfacing can repair and extend the liner without a full replacement. If a tile is cracked through, the barrier is gone and relining is the fix. Either way, you see the footage before we recommend anything. Call (866) 861-1187 for an exact quote – estimates are free.
Because an uncapped flue under that heavy oak canopy is an open door, and squirrels and birds will take it. The canopy keeps dropping leaf litter and nesting material down the stack, and once animals move in, the top sweep of the season turns into eviction, clearing, and a screened cap install. A proper cap is what stops the next round. Call (866) 861-1187 and we’ll get a cap and inspection on the books.
It’s common here, and the cause is freeze-thaw on exposed concrete and mortar. Fort Washington’s cold winters and damp summers work the top of the chimney year after year, and a spalling crown lets water into the masonry below. A crown repair or partial rebuild catches it before the damage spreads. Call (866) 861-1187 to have the crown looked at.
It matters more than ever, and here’s why in Fort Washington specifically: the original clay flue was sized for an open wood fireplace, and once you put a gas insert or a vented furnace or water heater into that oversized stack, the flue runs cold and damp and drafts weakly. The liner has to be sized to the appliance, not just patched where a tile is cracked. Call (866) 861-1187 to sort out what your converted setup actually needs.
Once a year, even on a fireplace you seldom light. The tree canopy and the summer damp don’t care how often you burn: debris builds up, mortar and tile deteriorate from moisture, and animals nest in uncapped flues in the off season. An annual inspection catches those things before they turn into a rebuild. Call (866) 861-1187 for a free estimate.
From annual sweep to full liner rebuild, one call covers it. We answer 24/7, and our fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (866) 861-1187 for a free estimate. We diagnose before we quote, show you the camera footage behind every recommendation, and tell you plainly when a repair can safely wait. Protect your home from the flue up.
Written by the team at Chimney Sweep Rhawnhurst.