Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Rhawnhurst Homeowners
A chimney cap and crown are the two parts of your chimney that take the weather head-on in Rhawnhurst. The cap keeps rain, birds and squirrels out of the flue; the crown is the concrete slab that sheds water away from the brick below. When either one fails, water gets into the masonry and starts the slow damage that leads to bigger repair bills.
We’re a chimney-only specialist, not a general handyman who sweeps on the side. Our technicians have up to 15 years of experience, and every job starts with a real inspection so you know exactly what’s failing before we quote anything. We work with professional-grade materials from names like Gelco and Copperfield, so what goes on your chimney is built to last. Most cap and crown jobs are same-day work, and you can reach us at (866) 861-1187. We can handle a simple cap swap or a full crown rebuild, and the written estimate always sets the final price.
What Our Chimney Cap & Crown Service Includes
A cap and crown are separate parts, so each one gets its own approach. Here’s what we do for all six under one roof.
Cap Installation
A cap is the metal or stainless cover that sits over the top of the flue and stops water, animals and debris from going down the chimney. You need one if your flue is open at the top, which is common on older Rhawnhurst homes. We measure the flue, set the cap on a properly fitted base, and anchor it so it stays put through wind and weather.

Cap Replacement
If a cap is rusted, bent, missing a screen or rattling loose, replacing it is usually quicker and cheaper than trying to patch it. We check the flue top and the existing base before we set the new cap, because a weak base fails again in a season or two. We’ll tell you if the cap is worth saving rather than replacing it just to make a sale.

Crown Repair
The crown is the concrete base at the very top of the chimney, and its whole job is to push water away from the brick. Cracks in the crown let water in, and repeated freeze-thaw cycles in this part of Philadelphia widen them year by year. We cut out the failed section, rebuild it with the proper slope and bond, and leave the brick below protected.

Crown Coating
Sometimes a crown is intact but porous and starting to work loose on the surface. A flexible crown coating seals the concrete and adds a weatherproof layer without rebuilding the whole slab. This is the middle option when the structure is sound and you want to extend its life. We check for movement and cracks first, so we don’t coat over a crown that needs repair.
Multi-Flue Cap
Homes with more than one flue need a cap that covers the whole top of the chimney, not just a single opening. A multi-flue cap is one larger unit fitted over the entire crown and vented to each flue. We measure every opening and confirm the fit so there are no gaps where water or critters can get in.
Custom Cap
Some chimneys, especially older ones with unusual shapes or non-standard flue sizes, need a custom cap. We take the measurements on-site and have the cap made to fit that chimney exactly, rather than forcing a stock size and hoping it seals. You’ll know the timeline and the price before we order anything.
From a routine chimney cap & crown inspection to a rebuilt crown, it’s the same visit and the same crew, so you won’t need to juggle contractors.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Work With for Chimney Cap & Crown
We work with a curated roster of professional-grade brands because the material on your roof has to survive decades of Northeast Philadelphia weather. Gelco is a well-known name for durable chimney caps and flashings, and we know how their units hold up when properly fitted. Olympia Chimney is another brand our technicians are trained on, and we understand where a cap or crown system tends to wear or loosen over time. DuraFlex and HeatShield come into play when a cap or crown issue has led to liner or flue damage that needs attention too.
Knowing the product lines means we can recommend the right material for your chimney rather than the only one we happen to carry. Whether your chimney already has a Gelco cap or you’re starting fresh with Olympia Chimney or Copperfield, we can help.
Signs You Need Chimney Cap & Crown Service Right Now
These are the symptoms we see most often when we inspect chimneys in Rhawnhurst. Catching them early usually keeps the job small.
- Water stains on the ceiling or fireplace wall. If you see brown staining or damp patches near the fireplace, the cap or crown may be letting water in. The sooner it’s found, the less masonry gets soaked.
- Loose or missing cap. A cap that’s blown off or rusted through leaves the flue open to rain and animals. It’s a quick fix that prevents bigger problems.
- Cracks in the concrete crown. Visible cracks or crumbling at the top of the chimney mean water is getting into the brick. A repair now is simpler than a rebuild later.
- Animals or birds in the flue. Nests and debris in an open flue are a sign there’s no proper cap. We clear the flue and fit the right cover.
- Rusted or corroded cap fittings. Rusted screws and screens point to an aging cap that won’t hold up much longer. Replacing it now is far easier than dealing with a cap that fails mid-storm.
Our Chimney Cap & Crown Process, Step by Step
We keep the process clear, from the first call to the final walkthrough.
- 1
Inspection first. We climb up and look at the cap, crown, flue and flashing, so we’re diagnosing the whole chimney rather than one part. You get photos and a plain-English report, not just a sales pitch.
- 2
Honest assessment. We tell you what needs work now, what can wait, and what’s actually in good shape. If a crown coating will buy you years, we’ll say so rather than pushing a rebuild.
- 3
Written estimate. Every option comes with a written estimate before we touch anything. The price is set per job, and you know the total before we start.
- 4
The work itself. We remove the old cap or crown, prep the surface, and install the new one with the right materials and slope. Multi-flue and custom jobs get measured on-site to ensure a proper fit.
- 5
Final check and cleanup. We test the fit, clear the work area, and walk you through what was done. You’ll get the report with photos so you can see the before and after for yourself.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Rhawnhurst?
Costs depend on how much of the chimney top needs work, but here’s a realistic sense of the ranges in this part of Philadelphia. These are typical estimates, and the written estimate after inspection sets the final number.
- Cap installation or replacement: $150 – $450 depending on cap type and flue size
- Multi-flue cap: $300 – $700 for a single large unit covering the whole chimney top
- Crown repair: $250 – $650 depending on crack size and how much concrete is rebuilt
- Crown coating: $200 – $500 for a flexible weatherproof seal on a sound crown
- Custom cap: $400 – $900 depending on shape and material
The price is driven by how many flues you have, the size of the crown, and whether there’s a liner or masonry issue underneath. We avoid overpaying by diagnosing the whole top of the chimney and prioritizing the real problems first. Our estimate is free, includes an inspection and photo report, and nothing is recommended without camera evidence you can see.
Chimney Cap & Crown Near Rhawnhurst, Our Service Area
We serve Rhawnhurst and the surrounding neighborhoods, including chimney cap & crown in Fort Washington and the same service in Mayfair. We also cover Fox Chase, Holmesburg, Bustleton, Oxford Circle, Tacony, Torresdale, Rockledge and Cheltenham Village. Dispatch runs from 7am to 7pm Sunday through Friday, so we can often fit a same-day inspection. For a broader view of our main service, visit Chimney Sweep Rhawnhurst.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions, Chimney Cap & Crown in Rhawnhurst
A chimney cap is the cover over the flue opening that keeps out rain, animals and debris. The crown is the concrete slab at the top of the chimney that pushes water away from the brick below it. Both work together to protect the chimney and the inside of your home. If either one is damaged, water can get in and start a much bigger problem.
Most cap and crown jobs take a single afternoon. A simple cap replacement is often done within an hour or two, while crown repair or a multi-flue cap can take most of a day. We’ll give you a realistic time window in the estimate. Custom caps need measuring first, so the timeline depends on the fabrication, and we’ll tell you before we order anything.
Typical estimates range from about $150 for a basic cap replacement to $900 for a custom cap, with crown repair and coating in between. The final number depends on your flue count, crown size and whether there’s underlying damage. The written estimate sets the real price, so there are no surprises. Call (866) 861-1187 for an exact quote, and estimates are free.
Yes, our technicians work with Olympia Chimney and Gelco products and know where those units wear out. That means we can fit the right cap or crown system and repair it if the issue comes back. We also work with Copperfield, DuraFlex and HeatShield for related liner and repair needs. Whether your chimney already has one of these brands or another make, we can help.
Yes, we can often schedule same-day cap and crown work, depending on the job and the schedule. Dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. We answer 24/7, so a call outside dispatch hours is booked into the next opening. Call (866) 861-1187 to check availability.
Our installations are backed by a workmanship guarantee, and we’ll go over the specifics with you before we start. If something isn’t right with the installation, we come back and fix it. You’ll have the written estimate and the guarantee terms in hand. Ask about the details when you call so you know exactly what’s covered.
Clear access to the fireplace and the area around the chimney base, and make sure someone is home to let the technician in. You don’t need to do anything to the roof, since the technician handles that. If you have photos or notes about past chimney work, have them ready so we can factor them in. Then simply call (866) 861-1187 to book the visit.
Schedule Your Chimney Cap & Crown Service in Rhawnhurst Today
If your cap is loose, your crown is cracked, or you’re not sure whether either needs work, call (866) 861-1187. We’ll inspect the top of your chimney, show you what we find, and give you a written estimate before anything starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Chimney work is all we do, and the estimate is free, so there’s no obligation.
Written by the team at Chimney Sweep Rhawnhurst.