Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Rockledge
If your chimney is leaking, smoking, or shedding mortar onto the sidewalk, you’re in the right place. Chimney Sweep Rhawnhurst handles chimney repair for homeowners in Rockledge, from a cracked crown on a 1920s twin to a full reline on a brick colonial along Huntingdon Pike. Rockledge is small and we know it well, so getting a technician out to you is quick. Every job starts with a camera inspection and a flat-price sweep agreed before we book. Call (866) 861-1187. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Rockledge Homeowners Call Chimney Sweep Rhawnhurst
Rockledge is under a square mile, and almost every house in it went up before 1940. That means the chimneys here are old masonry, and the work is nearly all repair: relining, repointing, and flashing. We focus on exactly that. Chimney work is all we do, so we do it right, and we’re not roofing or HVAC on alternating days.
Our technicians have up to 15 years of experience with pre-war stone, brick, and stucco-over-frame stacks, which is the standard house stock along Rockledge’s residential blocks and over toward the borough line at Cheltenham Village. We diagnose before we quote, with no upsells and no guesswork. When a repair can safely wait until spring, we say so.
That matters more here than in most towns because of one quirk of the housing: many Rockledge chimneys are shared between twin or attached homes. We check the shared masonry before we assume a leak is a single-house problem. And because Rockledge has its own code office, jobs tend to move quickly once the plan is clear. You’ll get a written estimate, not a vague number, and the estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Rockledge
From annual sweep to full liner rebuild, one call covers it all. These are the repairs Rockledge homes call us for most.
Mortar Repointing
Repointing replaces the crumbling mortar between bricks before the wall itself starts to move. In Rockledge’s freeze-thaw climate, joints on the crown and upper courses open first and let water in. We rake out the failed mortar and pack in new material matched to the original. A typical repointing job in Rockledge runs $600 to $1,800, depending on height and how many faces are affected.

Spalling Brick Repair
Spalling is when a brick face flakes off and leaves a soft, porous core behind. It’s common on Rockledge’s older masonry, and it accelerates once water gets behind the surface. We remove the failed units, set replacements, and address the source of the moisture. Left alone, spalling works its way inward and can turn a small fix into a rebuild.

Chimney Waterproofing
Waterproofing seals the masonry against the driving rain and summer humidity that push moisture into old brick. It’s the cheapest protection you can put on a Rockledge chimney, and it slows both spalling and joint failure. We use breathable sealers so moisture already inside the stack can still escape. A typical waterproofing job here runs $250 to $600.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the number-one source of chimney leaks we find in Rockledge. When it pulls loose or rusts through, water runs straight down the stack. We reset or replace the flashing and seal the seams. Flashing repair in Rockledge typically runs $350 to $900.
Trusted Brands We Service in Rockledge
We install and work with professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters for Rockledge’s old flues. HeatShield’s ceramic resurfacing can repair a failing liner without demolition, while DuraFlex liners suit a full reline. We don’t stock parts locally or run a warehouse. We specify the right material for the job, order it, and get it to your chimney. Rockledge is dense and easy to reach, so turnarounds are short once a job is scheduled.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Rockledge Homes
- Shared stacks misdiagnosed as single-house problems. Because many Rockledge twins share one chimney, a cracked flue or failed flashing on one side can push smoke, water, or creosote into the neighbor’s unit. The real fix starts by examining the whole shared stack.
- Unlined or clay-tile flues serving modern appliances. Original flues were built for wood, not the higher flue temperatures of a modern furnace or water heater. Over time they develop glaze that a brush alone can’t touch.
- Crowns cracking through freeze-thaw. Rockledge’s humid continental swings crack old mortar crowns, and water then spalls the brick from the inside out. A cracked crown is the quiet cause of a lot of the interior damage we see.
- Mid-century fireplaces with worn dampers and smoke chambers. The masonry fireplace is often the original one, and its damper and smoke chamber are usually the first parts to fail.
Pricing for Chimney Repair in Rockledge, PA
Here’s what chimney repair typically runs in Rockledge, so you know what to expect before you call.
- Mortar repointing: $600 – $1,800
- Spalling brick repair: $400 – $1,200
- Chimney waterproofing: $250 – $600
- Flashing repair: $350 – $900
- Chimney rebuilding: $2,500 – $6,000
- Tuckpointing: $500 – $1,500
Final price depends on height, access, how much of the stack is affected, and whether a shared stack is involved. You get a flat-price estimate agreed before we book, and the written estimate sets the final price. Nothing gets recommended that a camera inspection doesn’t show. That inspection and the photo report are included, so you can see the spalling, the open joints, or the crown crack for yourself.
One thing worth saying plainly: not every chimney on your street needs a reline, and we won’t sell you one the flue doesn’t need. Call (866) 861-1187 for a free estimate.
We Also Serve Cities Near Rockledge
We work across the towns around Rockledge, including McKinley, Cheltenham Village, Fox Chase, and Bustleton. If you’re just over the borough line, the housing stock and the chimney problems are the same, and access is easy. Call and we’ll book you into the next opening.
Serving Rockledge, PA – Our Local Coverage Area
We serve Rockledge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Rockledge
It’s almost always a joint job, because a shared stack has to be repaired as one structure to stop the leak. Fix one side and leave the other and water keeps finding the gap between them. We check the whole shared masonry first, then the written estimate covers the repair and you can split it with the neighbor however you both agree. Call (866) 861-1187 to arrange an inspection.
You know because you see the camera footage. Repointing fixes the outside masonry; relining fixes the flue inside, and the only honest way to tell them apart is a Level 2 inspection with a camera. We show you the cracked tiles, the gaps, or the glaze on-screen before recommending anything. If repointing is enough, that’s what the estimate says. Call us for a free estimate.
Yes, it’s a real problem. A flue built for a wood fire was never sized or lined for a modern furnace, and the flue gases can escape through gaps in the masonry. An unlined flue also lets creosote and rust build up out of sight. The fix is a proper liner rated for the appliance, but we confirm the condition by camera first. Call (866) 861-1187.
Creosote builds in stages: first-degree is a soft, flaky soot a brush removes, while third-degree is a hardened glaze that a brush alone can’t touch. Old unlined or clay-tile flues here tend to reach the glazed end because a brush misses it. Glaze is what feeds a chimney fire, so it gets professional removal. We tell you what stage you’re at after the inspection. Call for an exact quote.
It keeps cracking because of Rockledge’s freeze-thaw cycles acting on an old mortar crown. Water sits in hairline cracks, freezes, expands, and opens them wider each winter. A proper crown rebuild sheds water instead of trapping it, and that stops the cycle. We show you the crack before quoting the rebuild. Call (866) 861-1187 for a free estimate.
Written by the team at Chimney Sweep Rhawnhurst.