Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Somerton
If your chimney is pulling away from the house, dropping mortar on the roof, or smoking back into the living room, the repair starts with a straight answer about what’s actually failing. In Somerton, most of that work traces back to original mid-century chimneys that were built well and simply never inspected. We connect homeowners here with chimney specialists who diagnose before they quote, and nothing gets recommended until you’ve seen the evidence on a camera screen. That includes the flue, the smoke chamber, the crown, and the exterior brick. Call (866) 861-1187 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Somerton Homeowners Call Chimney Sweep Rhawnhurst for Chimney Repair
Chimney Sweep Rhawnhurst works on chimneys and fireplaces only. Not roofing on the side, not HVAC on alternating days. That single-trade focus matters on a Somerton repair job, because the problems here tend to be structural and old, not cosmetic. Our technicians have up to 15 years of experience, and we work with professional-grade materials from Gelco, Olympia Chimney, and Famco, the same names specified by certified chimney professionals nationwide.
Somerton sits in the Far Northeast, close enough that we can usually reach the neighborhood without a long wait. Same-day repairs are often possible when you call early in the day. We also know the housing. Most of the homes we’re called to around Somerton are post-war singles and rowhouses with an original exterior masonry chimney and a clay-tile liner, and we plan the work accordingly rather than quoting it like a new build.
We diagnose before we quote. No upsells, no guesswork, and no pushing a full rebuild on a homeowner who can’t verify the problem. If the chimney can be repaired and safely left alone, we’ll say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Somerton
From annual sweep to full liner rebuild, one call covers it all. Our chimney repair work in Somerton covers mortar, brick, crown, flashing, and structural rebuild, and we handle routine maintenance and major remediation without sending you to a second contractor.
Mortar Repointing
Repointing means grinding out failed mortar joints and packing in new mortar that matches the existing work. On a Somerton chimney, that’s usually the joints above the roofline, where freeze-thaw cycles through cold Pennsylvania winters have worked the old mortar loose. Catching it at this stage is a few hundred dollars. Ignoring it lets water get behind the brick, and that’s when the price climbs. A typical repointing job in Somerton runs $350 to $900, depending on how much of the stack is affected and how high the technician has to work.

Spalling Brick Repair
Spalling is brick that has cracked, flaked, or popped its face off, usually after years of absorbing moisture and then freezing. It shows up on Somerton chimneys on the south and west faces first, and often with white efflorescence powdering the surface nearby. We replace the failed brick rather than patching over it, because a brick that’s already breaking down won’t hold mortar. Typical spalling repair on a Somerton chimney runs $500 to $1,800, priced by how many bricks and courses need replacing.

Chimney Waterproofing
Humid summers do more damage to these older chimneys than most homeowners expect. A breathable masonry water repellent keeps rain out while letting moisture that’s already inside escape as vapor. Sealing a chimney with the wrong product traps that moisture and makes spalling worse, which is why the prep work (repointing and crown repair first) matters more than the sealer itself. Waterproofing in Somerton typically runs $300 to $700 for a single stack.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common source of the leak homeowners blame on the flue. When flashing pulls away or the sealant fails, water runs down the masonry and shows up as a stain on the ceiling well away from the chimney. Repairing it in Somerton usually runs $400 to $1,200, and we check it as part of every roof-level inspection.
Trusted Brands We Service in Somerton
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield products. Those names aren’t decoration. HeatShield is a ceramic resurfacing system that can repair a cracked clay flue from the inside, which gives homeowners an option short of full replacement. DuraFlex and Olympia liners are the stainless path when the original tile is too far gone to resurface. We don’t claim to stock parts locally; we specify the right system for the flue and get it to the job. Chimney work is all we do, so we do it right.
Common Chimney Repair Problems We See in Somerton Homes
- Cracked or offset clay-tile liners nobody has looked at. Most Somerton flues were installed decades before a camera inspection was standard practice. Cracks and shifted joints hide behind a working fireplace until a cleaning reveals them.
- Spalling brick and a crumbling crown. Summer humidity works its way into the mortar, then winter freezing breaks the brick face loose. By fall you’ve got loose brick, white powder on the masonry, and a crown that no longer sheds water.
- Appliances vented into stacks never designed for them. Water heaters and furnaces tied into an old fireplace flue create draft problems and heavier creosote in the smoke chamber. It gets misread as a simple cleaning issue.
- A damper that no longer seals. A rusted or bent damper lets cold air and fireplace smell into the room all year, and it’s often a repair rather than a rebuild.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Somerton, PA
Chimney repair in Somerton typically falls in these ranges. A routine sweep with a Level 1 inspection runs $150 to $250. A Level 2 camera inspection runs $200 to $450. Mortar repointing lands around $350 to $900, spalling brick repair $500 to $1,800, and flashing repair $400 to $1,200. A HeatShield resurfacing job runs $1,200 to $2,800, and a full stainless liner installation runs $2,000 to $5,500 depending on flue size and height. A partial rebuild of the top of the stack starts near $1,500 and a full chimney rebuild goes considerably higher. These are typical estimates for the local market, and the written estimate sets the final price. The estimate itself is free, and you get the camera photos with it.
| Repair | Typical Somerton Range |
|---|---|
| Sweep with Level 1 inspection | $150 – $250 |
| Level 2 camera inspection | $200 – $450 |
| Mortar repointing | $350 – $900 |
| Spalling brick repair | $500 – $1,800 |
| Flashing repair | $400 – $1,200 |
| HeatShield ceramic resurfacing | $1,200 – $2,800 |
| Stainless liner installation | $2,000 – $5,500 |
The Somerton Chimney Problem Nobody Plans For
Somerton was built out after the war, and those brick-and-frame homes came with a masonry fireplace as standard. That’s why the chimney work here is almost entirely residential wood-burning service, not boiler flues or newer gas inserts. It also means the original clay-tile liners in these mid-century chimneys are now often cracked, offset, or unlined after sixty years, and most have never had a Level 2 camera inspection since the first owner moved in. Chimney repair in Somerton is usually discovered during a routine cleaning, not planned as a remodel.
Here’s how that typical job goes. A fall cleaning turns up cracked or offset tiles in the original flue, often with first-degree creosote glazing the smoke chamber and a damper that no longer seals. A qualified local pro follows with a Level 2 camera inspection so the homeowner can watch the tile joints on the screen, then usually repairs with HeatShield or a stainless liner and repoints the exterior mortar before winter. Because these flues were never sized for a modern appliance, the fix often includes correcting the flue size or adding a properly sized cap.
This is exactly where the industry’s worst upselling happens, and we won’t do it. You get the camera footage. If a contractor can’t show you the crack on screen, don’t authorize the work. Somerton’s older chimneys are worth repairing properly, and sometimes the honest answer is that the flue is fine and the crown just needs work. Sometimes the answer is that it can safely wait until spring.
We Also Serve Cities Near Somerton
Somerton is one of several Far Northeast communities we cover. If you’re just over the line in Somerton, Bustleton, Northeast Philadelphia, Torresdale, or Rhawnhurst, the same specialists reach you. The housing stock is similar across those neighborhoods, so the diagnosis process and pricing look the same. Call (866) 861-1187 and we’ll book you into the next opening, Sunday through Friday, 7am to 7pm.
Serving Somerton, PA – Our Local Coverage Area
We serve Somerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Somerton
You need a Level 2 camera inspection, not a guess. A cleaning clears the creosote; the camera shows whether the tiles behind it are cracked, offset, or missing joints. Ask to see the footage before anyone recommends a liner. Call (866) 861-1187 for an exact quote, and estimates are free.
Because these chimneys are exposed to sixty years of Pennsylvania freeze-thaw, and the exterior mortar gives out before the flue does. Humid summers push moisture into the brick, winter freezes it, and the joints fail from the top down. A cleaning doesn’t fix that, and repointing early is far cheaper than rebuilding later. Call (866) 861-1187 for an exact quote, and estimates are free.
First-degree is light soot and flaky creosote that a sweep removes. Third-degree is glazed, hardened creosote that has bonded to the flue and won’t come off with a brush; it’s the stage that raises real chimney fire concern. If a technician finds glaze, they should show you the camera image and explain whether resurfacing or relining is needed. Call (866) 861-1187 for an exact quote, and estimates are free.
HeatShield is usually the better fit when the original tile is mostly intact with isolated cracks and gaps, since it resurfaces from the inside without demolition. A stainless DuraFlex or Olympia liner makes more sense when the tile is badly offset or the flue needs resizing. The camera decides, not the sales pitch. Call (866) 861-1187 for an exact quote, and estimates are free.
Most often it’s a repair. A rusted or bent damper, a failed smoke chamber, or a missing cap usually explains the smell, and none of those call for a full rebuild. A rebuild only makes sense when the masonry itself is structurally failing, and that should be shown to you on camera first. Call (866) 861-1187 for an exact quote, and estimates are free.
Protect your home from the flue up. Call (866) 861-1187 for a free estimate on chimney repair in Somerton, and we’ll show you exactly what’s failing before a single dollar gets quoted. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Rhawnhurst.