Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Frankford
If you own a rowhome in Frankford and your chimney hasn’t been looked at in a few years, you’re not alone. Most of the housing here went up between the 1890s and 1930s, and those original brick stacks have been through a lot since. We’re Chimney Sweep Rhawnhurst, and chimney work is all we do – no roofing on the side, no HVAC on alternating days. When you call (866) 861-1187, you’re talking to people who understand what a Frankford rowhome chimney actually looks like inside: parged flues, original brick, and decades of history layered into one stack. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Frankford Homeowners Call Chimney Sweep Rhawnhurst for Chimney Sweep
Frankford’s rowhouse stock is overwhelmingly early-20th-century masonry. Brick chimneys built for coal furnaces were later repurposed for oil and gas, which means the work here is rarely new construction. It’s decades of layered flue history inside party-wall chimneys shared along continuous rows. That’s the reality of almost every job in 19124, and it shapes how we approach a sweep.
A cleaning or relining job in Frankford usually means dealing with an aged brick stack on a mid-block rowhome, where access is from the roof and the neighbors’ chimneys sit inches away. We know that layout. We know that on a continuous block, a crumbling crown or a loose brick on one house can mean water tracking into a neighbor’s flue through shared masonry. So we check the party-wall side and the adjacent stacks, not just the one we were called for.
Our technicians have up to 15 years of experience, and every one of them works on chimneys exclusively. We also install and work with professional-grade products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the same materials specified by certified chimney professionals across the country. We diagnose before we quote. Nothing gets recommended without camera evidence you can see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Frankford
From an annual sweep to a full liner rebuild, one call covers it. Here’s what most Frankford homeowners end up needing, and how each service works.
Level 1 Inspection
A Level 1 inspection is the basic annual check: accessible parts of the chimney, firebox, damper, and flue, examined without any special tools. If your Frankford home has a chimney that’s been swept regularly and you haven’t changed anything about how you burn, this is usually enough. It’s quick, and it tells you whether anything has shifted since the last visit.

Level 2 Inspection
A Level 2 inspection adds a camera run through the flue, and on Frankford’s older rowhomes it’s the inspection that actually answers questions. Clay-tile liners crack after freeze-thaw cycles. Parged flues break down after decades of coal-then-gas use. A camera shows you exactly where the damage is, and we hand you the photo record so you can see it too. This is the inspection we recommend before any repair is quoted.

Creosote Removal
Creosote builds up in layers, and the third-degree glaze that forms in flues never designed for the appliance now vented into them can’t be touched by a standard brush. That’s a real fire hazard, and it needs proper removal, not a quick pass. We identify the creosote grade during the sweep and explain what we found before we recommend anything.

Soot Removal
Soot collects on the smoke chamber and flue walls and, left long enough, restricts draft and corrodes the masonry. On a Frankford rowhome with a parged flue, soot combined with moisture is often what starts the breakdown. We clear it as part of the sweep and check the smoke chamber while we’re in there.
Trusted Brands We Service in Frankford
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield products. HeatShield’s ceramic resurfacing system is worth knowing about if you’re facing a liner repair, because it can extend a chimney’s life without full demolition. DuraFlex liners cover the full relining side. We don’t carry a parts inventory – materials are ordered for your job – but these brands are widely available, so turnaround stays reasonable. If you’ve been told you need a rebuild, ask whether a resurfacing option fits first. Sometimes it does.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Frankford Homes
- A crumbling crown nobody sees. The crown fails on the roof, out of sight from inside the house, and water tracks into the party-wall side and a neighbor’s flue. On a continuous Frankford block, that’s a shared problem, which is why we look at adjacent stacks during the same visit.
- A cracked clay-tile liner misread as a draft issue. A freeze-thaw cycle cracks the tile, and the symptom looks like poor draft. Capping it doesn’t fix it. Relining does.
- Third-degree creosote glaze. An appliance vented into a flue never designed for it produces glazed creosote a brush can’t remove. A standard sweep won’t solve it, and you shouldn’t be sold one that claims to.
- Spalled brick and deteriorated mortar joints. Philadelphia’s freeze-thaw winters and humid summers are hard on old brick and mortar crowns. After a cold snap, spalling and cracked crowns are a recurring reason for calls across Frankford.
Pricing for Chimney Sweep in Frankford, PA
Here’s what typical work runs in this market. A standard annual sweep with a Level 1 inspection in Frankford usually falls in the $150 to $275 range. A Level 2 inspection with camera documentation typically runs $200 to $400. Creosote removal, when the buildup goes past a routine sweep, generally lands between $250 and $600 depending on grade and flue length. Soot removal as part of a sweep is usually included. Crown or cap work, when it’s needed, starts around $300 and goes up from there for larger repairs.
Those are estimates, not quotes. The written estimate sets the final price, and it comes after we’ve actually looked at your flue. If the camera shows the flue is sound, we’ll tell you so, even if that means less work for us. Estimates are free. Call (866) 861-1187 for yours.
| Service | Typical Frankford Range |
|---|---|
| Annual sweep with Level 1 inspection | $150 – $275 |
| Level 2 inspection with camera | $200 – $400 |
| Creosote removal | $250 – $600 |
| Crown or cap work | From $300 |
We Also Serve Cities Near Frankford
We cover the neighborhoods around Frankford as well – Oxford Circle, Olney, Tacony, and Mayfair are all regular parts of our service area, and the rowhouse chimney issues are much the same. If you’re in any of these, call the same number and we’ll book you in. Serving Frankford and the surrounding blocks is what our schedule is built around.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Frankford
Yes. On Frankford’s continuous rowhouse blocks, a chimney is structurally tied into the row, so a crumbling crown or loose brick on one house can let water track into a neighbor’s flue through the shared party-wall masonry. That’s why our technicians routinely check the party-wall side and adjacent stacks, not just the chimney we were called for. If you’ve noticed moisture or a draft issue on a shared wall, call (866) 861-1187 and we’ll take a look at both sides.
A Level 1 is fine if your chimney has been swept regularly and nothing about how you burn has changed. A Level 2 is the better call if you’ve had a liner crack, a chimney fire, a new appliance installed, or a change in how the flue vents. On Frankford’s older homes, a camera inspection usually answers the question the first time. Call (866) 861-1187 for a free estimate on either.
Third-degree creosote is a hard, glazed coating on the flue wall, often shiny and tar-like, and a standard brush passes right over it without removing it. It forms when an appliance is vented into a flue never designed for it, and it’s a serious fire hazard. It needs proper removal, not a routine sweep. If you’ve been told a standard sweep will handle it, call (866) 861-1187 and we’ll tell you what the flue actually needs.
No. A spalled or cracked crown means water is getting in at the top, but the flue itself may still be sound. The only way to know is a camera inspection, and that’s not a guess we’ll make for you over the phone. We look, show you the photos, and let you decide. Call (866) 861-1187 to book an inspection with a free estimate.
Yes. Chimneys built for coal furnaces and later repurposed for oil or gas often have parged flue interiors that break down differently than clay tile, and the creosote that forms from a modern appliance in an old flue behaves differently too. Our technicians have up to 15 years of experience with exactly this kind of stack. For a sweep on a Frankford rowhome chimney, call (866) 861-1187.
Chimney work in Frankford means old brick, shared walls, and flues with real history. We diagnose before we quote, and we show you the evidence. From an annual sweep to a full liner rebuild, one call covers it. Call (866) 861-1187 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Rhawnhurst.