Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Frankford?
Chimney cleaning in Frankford typically costs $150 to $390, with most standard single-flue sweeps landing between $180 and $260. That price covers a professional inspection, a thorough flue cleaning, and a written report on what we find. If the inspection turns up creosote buildup, a damaged cap, or a failing liner, the estimate for that work is separate and always written down before we start.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 861-1187 for a free estimate.
Key Takeaways
- A standard chimney sweep in Frankford runs $150-$390 depending on flue size, access, and how much creosote has built up.
- Chimney caps and crowns, liner repairs, and full relining are priced separately and estimated on site.
- Frankford’s older rowhouses and converted heating systems often need extra inspection time, which can push a job toward the higher end.
- Free estimates and upfront written pricing mean you know the number before any work begins.
- Our technicians have up to 15 years of experience with chimney systems of every kind.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the numbers break down for a typical Frankford home. These are estimated ranges, not fixed prices. The written estimate you get on site sets the final number, and it never changes without your approval.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Standard chimney sweep (single flue) | $150 – $260 | Inspection, creosote removal, soot cleanup, written report |
| Heavy creosote removal (stage 2 or 3 buildup) | $250 – $390 | Extra time and specialized tools for thick, glazed deposits |
| Second flue or multi-flue cleaning | $80 – $150 per additional flue | Each flue swept and inspected separately |
| Chimney cap installation | $200 – $450 | Cap sized to the flue, keeps out rain, animals, and debris |
| Crown repair or rebuild | $300 – $900 | Sealing or replacing the concrete crown at the top |
| Liner repair (HeatShield resurfacing) | $900 – $2,200 | Ceramic resurfacing of a damaged clay liner |
| Full stainless liner installation | $1,800 – $4,500 | New DuraFlex or Olympia Chimney liner, depends on height and flue size |
| Fireplace repair | $250 – $1,200+ | Depends on the specific issue found during inspection |
Two things move the price most: how much creosote is in the flue and how hard it is to reach the chimney. A clean flue on an accessible roofline is a quick job. A flue packed with glazed creosote, a damper that won’t open, or a chimney tucked behind a steep roofline adds time and specialized tools. We diagnose before we quote, so you know which situation you’re in before the work starts.
What Affects Chimney Cleaning Pricing in Frankford
Frankford is a neighborhood of older rowhouses, twin homes, and converted heating systems, and that housing stock shapes the cost of chimney work here more than the calendar does. Here’s what pushes a quote up or down.
- Creosote level. Light soot sweeps quickly. Glazed, tar-like stage 3 creosote can take two or three times as long to remove safely, which is why heavy buildup jobs land at the top of the range.
- Flue size and shape. A standard round or square flue is straightforward. Oversized or offset flues take longer to clean completely and often need sizing adapters for a new liner.
- Roof access. Frankford rowhouses often sit close together with steep pitched roofs. If we need to work from a ladder rather than walk the roof, that’s extra time and safety setup, and it’s reflected in the estimate.
- Chimney condition. Cracks in the crown, a missing cap, or spalling brick means we’re cleaning and also flagging structural issues. Cosmetic or mechanical problems found during the sweep often add a repair line to the estimate.
- Gas versus wood. Wood-burning fireplaces and stoves build creosote and need regular sweeping. Gas fireplaces produce less solid buildup but still need inspection of the venting and flue, and liner work on a gas flue follows different sizing rules.
- How long it’s been. A chimney that hasn’t been touched in years takes longer than one cleaned regularly. Regular annual sweeps keep jobs shorter and cheaper over time.
Why Frankford Chimney Prices Run the Way They Do
Frankford’s chimney stock is old. Many of the brick chimneys in the neighborhood were built for coal or oil heat and later converted to gas, wood, or a mix. That history matters when we inspect. A flue built for one fuel doesn’t always vent a different fuel correctly, and what looks like a simple sweep can turn into a conversation about whether the liner is sized and rated for what’s now running through it. We look for that before we quote, not after.
Roof pitch is the other local factor. Rowhouse chimneys here often share party walls and sit on steep, narrow roofs. Getting a ladder set safely and working cleanly without disturbing neighbors is part of the job, and it’s part of what we price. It’s also why we prefer to see the chimney in person before we commit to a number. A phone estimate on an old Frankford rowhouse is a guess. The on-site estimate isn’t.
Because chimney work is all we do, we can spot the difference between a routine sweep and a system that needs more. That matters when you’re deciding whether to clean, repair, or rebuild. Chimney Sweep Rhawnhurst handles the full range, from annual maintenance to structural work, so the person who inspects your flue is the same one who can quote the repair.
What’s Included in a Chimney Cleaning
A proper sweep is more than brushing. Here’s what a standard visit includes, and what we check while we’re there.
- Full flue inspection before and after cleaning, with photos when something needs attention.
- Creosote and soot removal using drop cloths and a sealed vacuum so your living room stays clean.
- Firebox and damper check to confirm the damper opens and closes freely and seals when closed.
- Cap and crown inspection from the roof, looking for cracks, missing caps, or loose mortar.
- Written report on the condition of the flue, any repairs recommended, and the reason for each one.
If we find a problem, we show you the photo and explain what it means before quoting anything. No upsells, no guesswork. You decide what gets done.
Repair or Replace? Reading the Estimate
This is the question that drives most chimney spending decisions, and the answer depends on what’s actually wrong. A cracked crown or a loose cap is a repair. A clay liner with missing flue tiles and gaps between sections is a different matter.
For liners, we work with two options. HeatShield ceramic resurfacing can extend the life of a damaged clay liner without demolishing it, which usually costs less than a full reline. When the liner is too far gone for resurfacing, a new stainless liner from DuraFlex or Olympia Chimney restores the flue. We use Gelco, Famco, and Copperfield products alongside those brands for caps, dampers, and related components, all professional-grade materials specified by chimney professionals around the country.
Not every damaged liner needs replacing. Not every sound-looking liner is safe. That’s why we inspect before we quote and give you the repair option first when it’s a legitimate one.
How to Save on Chimney Cleaning
There’s no magic discount, but a few habits keep chimney costs down over the years.
- Sweep on a schedule. An annual cleaning on a chimney that’s used regularly is cheaper than one big cleanup after years of neglect. Creosote compounds, and stage 3 buildup costs more to remove safely.
- Burn dry, seasoned wood. Wet wood smokes more and deposits more creosote. Dry wood keeps the flue cleaner between sweeps.
- Get the cap installed early. A cap is a modest line item that keeps rain, birds, and debris out of the flue, which prevents larger repairs.
- Ask for the repair option. When a liner is damaged, resurfacing with HeatShield can be a legitimate alternative to full replacement. Ask whether it applies to your flue.
- Bundle the call. If the sweep turns up a cap or crown issue, having it handled during the same visit saves a return trip.
Estimates are free, and the written number is what you pay. Call (866) 861-1187 to book one.
Can You Come Today?
Often, yes. Same-day service is available when the schedule allows. Call (866) 861-1187 and we’ll tell you what’s open. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call that comes in then is booked into the next opening.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Frankford?
Chimney cleaning in Frankford typically costs $150 to $390, with most standard single-flue sweeps at $180 to $260. Heavy creosote buildup or poor roof access pushes the price higher. Call (866) 861-1187 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair usually costs less than replacement. HeatShield ceramic resurfacing runs roughly $900 to $2,200, while a full stainless liner installation typically runs $1,800 to $4,500. Resurfacing only works if the liner still has enough structure to hold it, so the inspection decides. Call (866) 861-1187 to find out which applies to your flue.
How often should a chimney be cleaned?
Once a year for a chimney that’s used regularly, and more often if you burn a lot of wood. A yearly sweep keeps creosote from reaching the stage where removal gets expensive. Call (866) 861-1187 to schedule one.
Do I need a chimney cap, and what does it cost?
A cap typically costs $200 to $450 installed, and it’s worth it. A cap keeps rain, animals, and debris out of the flue, which prevents the kind of water damage and blockages that turn into bigger repairs. We install caps as part of the same visit. Call (866) 861-1187 for an estimate.
Can you clean a gas fireplace chimney?
Yes. Gas fireplaces produce less solid creosote than wood, but the venting and flue still need inspection and cleaning, and a sweep usually runs $150 to $260. We check the venting and flag anything that needs attention. Call (866) 861-1187 to book.
Why Call Chimney Sweep Rhawnhurst for Frankford Chimney Cleaning
Chimney work is all we do. We don’t do roofing, HVAC, or general handyman work on the side, so every technician on the job focuses on flues, liners, caps, crowns, and fireplaces. Our technicians have up to 15 years of experience across every kind of chimney system you’ll find here, from converted rowhouse flues to wood stoves and gas inserts.
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield products, the same professional-grade materials specified by chimney professionals nationwide. That covers everything from a cap to a full liner rebuild, so you don’t have to juggle separate contractors. We diagnose before we quote. Free estimates, upfront written pricing, and a satisfaction guarantee. Call (866) 861-1187. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Frankford market as of 2026. Chimney Sweep Rhawnhurst offers free estimates – call (866) 861-1187.
Written by the team at Chimney Sweep Rhawnhurst.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Nicole Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Robert Bennett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Michael Anderson