Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Rhawnhurst?
A chimney cap installed on a typical Rhawnhurst home usually runs $180 to $450, and a new crown typically costs $350 to $900 depending on size and whether the old crown has to be chipped off first. When a cap and crown are done together, most homeowners in Rhawnhurst land somewhere between $500 and $1,150 for the pair. Those are estimates for this local market, and a written estimate from Chimney Sweep Rhawnhurst sets the final price.
Chimney work is all we do, so we diagnose before we quote. That matters more with caps and crowns than with almost any other part of the system, because what looks like a simple capping job from the ground often turns out to be a crown that’s cracked through, a flue with no cap for years letting water in, or a masonry top that’s spalling after a few hard freezes. We look before we price.
Key Takeaways
- Chimney caps in Rhawnhurst typically cost $180 to $450, crowns $350 to $900, and both together $500 to $1,150.
- Rhawnhurst’s freeze-thaw cycles are the main reason crowns crack – water gets into the masonry, freezes, and pushes it apart.
- A missing or rusted-out cap is the cheapest fix you’ll ever make to protect a flue from water and animals.
- Resurfacing a worn crown with HeatShield can sometimes cost less than a full crown rebuild.
- Every job starts with a free estimate and a written price.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down by line item for a typical Rhawnhurst chimney. These are estimates for the 2026 local market – your written estimate is what actually sets your price.
| Line Item | Typical Cost Range |
|---|---|
| Standard single-flue cap (stainless or galvanized steel) | $180 – $320 |
| Multi-flue cap (custom-fabricated to fit) | $280 – $450 |
| Decorative or copper-finish cap | $350 – $550 |
| Cap with animal guard / spark arrestor screen | $200 – $380 |
| Crown repair – patching hairline cracks | $350 – $550 |
| Crown rebuild – full removal and new pour | $550 – $900 |
| Crown resurfacing with HeatShield ceramic system | $400 – $700 |
| Cap and crown installed together (typical bundled job) | $500 – $1,150 |
| Custom crown on oversize or irregular masonry top | $900 – $1,400 |
What pushes a job toward the top of those ranges? The big ones are access and condition. A chimney crown on a steep roofline takes more setup than one you can reach from a modest ladder. A crown that’s been cracked for several seasons usually has water damage underneath, so the masonry top has to be chipped back and rebuilt. And a flue with no cap for a long time often has a rusted damper or a compromised liner underneath, which is a separate repair but worth checking while we’re up there. Conversely, a straight capping on a sound crown is one of the fastest jobs we do, and it sits at the bottom of the range.
If you want to see what’s involved in the work itself, our page on chimney cap & crown walks through the components and the installation process stage by stage.
What Affects Chimney Cap & Crown Pricing in Rhawnhurst
Rhawnhurst sits in Northeast Philadelphia, and the housing stock here shapes the pricing in ways a generic national pricing guide won’t tell you. Most of the homes we see were built in the post-war decades, which means brick chimneys with mortar that has had 60-plus years of Northeast winters. That age shows up in crown and cap work, and it’s what really drives the number.
- Freeze-thaw damage. Philadelphia winters cycle above and below freezing repeatedly. Water enters a hairline crack in the crown, freezes overnight, expands, and widens the crack. By spring the crown looks fine from below but is failing. This is the single biggest reason crowns need full rebuilds here rather than patches.
- The original crown design. Many mid-century Rhawnhurst chimneys have thin, flat concrete crowns with no overhang. Those wash out and crack faster than properly sloped crowns, so we often recommend a full rebuild with a proper sloped form rather than repeated patching.
- Number of flues. A chimney with two or three flues needs a custom-fabricated cap, which costs more than a standard single-flue model. We measure and build to fit, not force a stock cap onto an odd opening.
- Roofline and access. Steep or high roofs, trees, and tight setbacks all add setup time. A chimney at the edge of a ranchette takes far less time to reach than one set back mid-slope on a split-level.
- Material choice. Galvanized steel is the least expensive and lasts years; stainless steel and copper cost more upfront but resist rust and hold their appearance longer. We work with professional-grade cap brands including Olympia Chimney, Famco, and Copperfield so you can pick the finish you want without compromising on durability.
- Hidden damage. A sagging or spalling crown sometimes sits on a mortar wash that’s already failing. If we uncover that during the estimate, we’ll show you and price it honestly. We diagnose before we quote, so nothing is added later without your approval.
How to Save on Chimney Cap & Crown
You don’t need to overpay for this work. A few practical moves keep the spend reasonable without cutting corners on the parts that protect your chimney.
- Combine the cap and crown in one visit. Bundling both pieces of work means one setup, one trip, and one invoice. The combined price usually comes in below doing them separately.
- Fix a failing crown early. A patched crown costs a fraction of a full rebuild. Waiting a season or two usually moves a $400-to-$500 patching job into $550-to-$900 rebuild territory.
- Ask about resurfacing before you replace. The HeatShield ceramic resurfacing system can restore a worn crown and masonry top without a full tear-down, which can save real money and extend the life of the structure.
- Check the liner while we’re up there. A cap and crown visit is the natural moment to inspect the liner. Fixing a small issue now beats addressing a full reline later – and our DuraFlex liner work is all done on the same visit if you decide to move forward.
- Get the free estimate in writing. No surprises, no after-the-fact add-ons. Call (866) 861-1187 and we’ll walk you through the options before anything is scheduled.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Rhawnhurst?
A standard chimney cap in Rhawnhurst typically costs $180 to $320, and a custom multi-flue cap runs $280 to $450. Decorative or copper-finish caps go a bit higher at $350 to $550. The written estimate sets your final price, and estimates are free – call (866) 861-1187 for an exact quote.
Is it cheaper to repair or replace a chimney crown in Rhawnhurst?
Repairing a cracked crown typically costs $350 to $550; a full rebuild runs $550 to $900. Patching is cheaper when the damage is limited to surface cracks and the crown is still sound underneath. If the crown is crumbling or has been leaking for seasons, a rebuild is usually the better long-term spend. We’ll tell you which one applies to yours before you commit – call (866) 861-1187.
Do I really need a chimney crown in Rhawnhurst?
Yes. The crown is the sloped concrete top that sheds water away from the masonry, and in Rhawnhurst’s freeze-thaw climate a missing or cracked crown lets water into the brick, where it freezes, expands and slowly breaks the chimney down. A proper crown costs a fraction of the masonry repairs that follow a failing one. Call (866) 861-1187 for a free estimate.
Can I install a chimney cap myself in Rhawnhurst?
We don’t recommend it. Cap installation involves working at height on a roof, and getting the fit and fastening wrong can leave you with a loose cap that leaks or blows off. The job is quick for a trained specialist, typically $180 to $320 for a standard cap, and it’s done safely. Call (866) 861-1187 – estimates are free.
Can you install a cap and crown the same day in Rhawnhurst?
Often, yes. A standard cap and a straightforward crown can usually be completed in a single visit once the estimate is approved, with same-day service available. Larger rebuilds and custom caps may need a scheduled follow-up. Call (866) 861-1187. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Choose Chimney Sweep Rhawnhurst for Cap & Crown Work
Chimney work is all we do. We’re not a general handyman outfit that sweeps chimneys on the side or a roofer who takes on caps between bigger jobs. Every technician on the team works on chimneys and fireplaces, and our technicians have up to 15 years of experience with caps, crowns, liners and rebuilds. That single-trade focus is why we can handle both routine annual maintenance and structural remediation on the same call or a follow-up visit at your convenience.
We install and work with professional-grade materials from brands certified chimney professionals specify nationwide – DuraFlex liners, HeatShield ceramic resurfacing, Gelco and Olympia Chimney parts, Famco caps, and Copperfield products. Those brands aren’t a marketing bullet; they’re the actual materials we use on your roof. Protect your home from the flue up.
From annual sweep to full liner rebuild, one call covers it all. If your crown has cracked through or your cap has rusted out, that’s exactly the kind of job we handle. We’ll inspect the chimney, show you what we find, and price the fix before anything is ordered.
If you’re also looking into a full inspection or a sweep, our main Chimney Sweep Rhawnhurst page covers the full service list and how we work. And if a liner issue turns up during your cap and crown visit, that’s a job we take on too – structural-level work is where our specialty really shows.
What Happens When You Call
Call (866) 861-1187 and we’ll ask a few questions about your chimney – how old the home is, whether the cap or crown is visibly damaged, and whether the chimney has been serviced recently. From there we’ll book a free estimate at a time that works for you. When we arrive we’ll inspect the cap, crown, and flashing, and if there’s an underlying liner or masonry issue we’ll point it out with a photo or a look from the roof. You get a written price before any work is approved.
Dispatch runs 7am to 7pm, Sunday through Friday. We answer the phone 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is available when the schedule allows, and estimates are always free.
Final Word on Rhawnhurst Cap & Crown Pricing
A chimney cap and crown in Rhawnhurst typically runs $500 to $1,150 for both together, and that’s money spent protecting the whole chimney from Northeast weather. The cap keeps water and animals out of the flue. The crown keeps water out of the masonry. Both fail quietly, and both eventually cost more to fix the longer they’re left. If you’re not sure what shape yours is in, get a free estimate and we’ll tell you plainly.
Call (866) 861-1187 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Rhawnhurst.
Pricing reflects the Rhawnhurst market as of 2026. Chimney Sweep Rhawnhurst offers free estimates – call (866) 861-1187.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Nicole Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Robert Bennett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Michael Anderson