Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Rhawnhurst?
Chimney liner work in Rhawnhurst typically runs $2,400 to $6,800 for a stainless liner installation, and a partial or full chimney rebuild generally falls between $5,500 and $18,000 depending on how much brick and how many flue tiles have to come down. A HeatShield ceramic resurfacing job, which repairs a damaged liner without tearing the chimney apart, usually lands in the $1,600 to $3,200 range. Those are the three numbers that decide most estimates in this neighborhood.
We don’t quote a single flat figure over the phone because the liner size, the condition of the flue, and whether the crown and cap have held up all change the job. We diagnose first, put the finding in writing, and the written estimate sets the final price. That’s how a chimney specialist works, and it’s the only way to give you a number that means anything.
Key Takeaways
- Stainless liner installation in Rhawnhurst: typically $2,400 to $6,800.
- HeatShield ceramic resurfacing (a liner repair, not a replacement): typically $1,600 to $3,200.
- Partial rebuild (crown, top courses, flue tiles): typically $5,500 to $9,500.
- Full chimney rebuild from the roofline up: typically $9,500 to $18,000.
- Every price depends on the inspection. Estimates are free and the written estimate is final.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break out for Rhawnhurst homes in 2026. Treat these as typical estimates for the work described, not as a quote for your chimney. A two-flue chimney costs more than a single-flue one, and a chimney that’s been leaking for a few winters costs more than one that failed inspection last month.
| Work | Typical Rhawnhurst Range (2026) | What It Covers |
|---|---|---|
| Video inspection and written evaluation | Free with the estimate | Camera run through the flue, crown and cap checked, condition documented |
| HeatShield ceramic resurfacing | $1,600 – $3,200 | Repairs cracked or pitted flue tiles instead of tearing out the liner |
| Stainless steel liner, single flue | $2,400 – $4,500 | Insulated DuraFlex or Olympia liner sized to the appliance, cap, top plate |
| Stainless steel liner, two flues | $4,200 – $6,800 | Two appliances relined, both caps and top plates set |
| Chimney cap and crown replacement | $550 – $1,600 | New crown, drip edge, cap to keep water and animals out |
| Partial rebuild (top courses and flue tiles) | $5,500 – $9,500 | Rebuild from the roofline down as far as the damage goes |
| Full rebuild, roofline up | $9,500 – $18,000 | Tear down and rebuild above the roof, new crown and liner |
What pushes the number up is the amount of masonry that has to come down and go back up. A liner installation is mostly materials and access; a rebuild is brick, mortar, staging and labor, and that’s where the price climbs fastest. What pulls it down is catching the problem before water gets into the masonry. A resurfaced flue through HeatShield now can save you from a rebuild later, and that’s a conversation worth having before the damage spreads.
We install and work with professional-grade materials: DuraFlex and Olympia Chimney for stainless liners, HeatShield for ceramic resurfacing, Gelco, Famco and Copperfield for the components that finish the job. These are the same brands specified by certified chimney professionals nationwide, which matters more than a low bid. A cheap liner that fails in a few years costs you twice.
What Affects Chimney Liner & Rebuild Pricing in Rhawnhurst
Rhawnhurst is a neighborhood of brick rowhomes and detached houses built mostly in the decades after World War II, and that housing stock shapes the pricing here in ways it doesn’t in newer suburbs. The chimneys are original to the houses, they’re solid brick with clay flue tiles, and many have never had a liner upgrade since they were built.
- Clay tile condition. Older Rhawnhurst chimneys were built with clay flue tiles that crack and spall over time. If a tile is compromised, a stainless liner or a ceramic resurfacing is no longer optional for a wood-burning fireplace. Cracked tiles are the single most common reason we recommend liner work.
- Appliance type. A wood-burning fireplace, a gas insert and an oil furnace each need a different liner size and material. A high-efficiency gas appliance needs an appropriately sized liner, and a wood stove needs a properly insulated one. The size drives the material cost.
- Number of flues. Rowhomes in Rhawnhurst often have more than one flue serving more than one appliance. Two flues means two liners and roughly double the material and labor.
- Crown and cap condition. The masonry crown at the top of the chimney sheds water away from the flue. A cracked crown lets water in, which freezes in the tiles in a Philadelphia winter and splits them. Replacing a crown with a liner job is far cheaper than doing the liner twice.
- Access and roofline. A chimney on a low-pitch roof is easier to reach than one on a steep, tall rowhome roof. Access affects the labor portion of the rebuild, not the materials.
- Local freeze-thaw cycles. Philadelphia’s winters swing above and below freezing repeatedly, and that cycle is hard on brick and mortar. It’s the reason a small masonry crack in October can be a rebuild by spring if it’s left alone.
The pattern here is that the chimney usually tells you what it needs if you look. Our technicians have up to 15 years of experience diagnosing exactly this. We run a camera down the flue, check the crown and cap, and tell you what we find before we quote. No guesswork, no upsell.
If your inspection turns up structural damage, the full scope of chimney liner & rebuild work is where we spend most of our time, and it’s the part most sweep-only competitors won’t touch.
How to Save on Chimney Liner & Rebuild
The biggest savings in chimney work come from acting early. A liner installed on a chimney with a sound crown and cap costs a fraction of a liner plus a rebuild, and the difference is almost always the water damage that a cheap cap or a cracked crown let in over a few winters. Here’s what actually helps in Rhawnhurst:
- Fix the crown and cap with the liner, not after. Doing both in one visit avoids a second staging setup and protects the liner you just paid for.
- Ask about resurfacing before replacement. HeatShield ceramic resurfacing can repair a flue that isn’t too far gone and costs a fraction of a full reline. Not every damaged flue qualifies, but it’s the first thing we check.
- Get the inspection in writing. A documented evaluation lets you compare quotes on the same scope. We put the findings and the written estimate in front of you before any work starts.
- Don’t wait on a cracked flue. A small repair now is cheaper than a rebuild later, and it’s a safety issue as much as a cost one. A compromised flue on a wood-burning fireplace is a fire risk, and we don’t recommend running it until it’s evaluated.
- Bundle your annual sweep. Keeping the flue clean and the cap in place is the cheapest way to avoid the big bills. Routine maintenance costs a fraction of remediation.
Estimates are free and we answer 24/7. Call (866) 861-1187 and we’ll set up the inspection. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Rhawnhurst?
A stainless steel chimney liner in Rhawnhurst typically costs $2,400 to $4,500 for a single flue and $4,200 to $6,800 for two flues, all installed. The written estimate sets the final price after the flue is inspected. Call (866) 861-1187 for an exact quote; estimates are free.
Is it cheaper to resurface a chimney liner or replace it?
Resurfacing is cheaper when it’s an option: HeatShield ceramic resurfacing typically runs $1,600 to $3,200 versus $2,400 to $6,800 for a full stainless reline. It only works on certain kinds of damage and doesn’t fit every flue, so we check before recommending it. Call (866) 861-1187 and we’ll tell you which one your chimney needs.
How much does a chimney rebuild cost in Rhawnhurst?
A partial chimney rebuild in Rhawnhurst typically costs $5,500 to $9,500, and a full rebuild from the roofline up runs $9,500 to $18,000. The range depends on how much brick has to come down and how many flue tiles are compromised. Call (866) 861-1187 for a written estimate based on a real inspection.
Can you come today?
Same-day service is often possible, and we answer 24/7 so you can call whenever the problem shows up. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 861-1187 to check availability and book an inspection.
Do I need a liner if I have a gas fireplace?
Yes, a gas appliance needs a properly sized, code-compliant liner, and the installation typically costs $2,400 to $4,500. The size and material differ from a wood-burning setup, so the inspection determines what’s required. Call (866) 861-1187 and we’ll evaluate the flue before quoting.
Does a chimney liner need a permit in Rhawnhurst?
Most municipalities require a permit for a chimney liner or rebuild, so it’s worth asking your city’s building department what applies to your address before work starts. We can walk you through what the job involves so you know what to ask. Call (866) 861-1187 with questions.
Why Choose a Chimney Specialist for Liner and Rebuild Work
A liner installation and a chimney rebuild are structural work. They’re not a cleaning job with a wrench, and they’re not something a general handyman should be talking you through. When a flue is cracked or a chimney is leaning, the decision between resurfacing, relining and rebuilding depends on reading the structure, and getting it wrong has real consequences.
Chimney work is all we do, so we do it right. Our service menu covers every stage of chimney health, from cleaning and capping through liner installation and structural rebuild, all in one place. That means you’re not juggling a sweep, a mason and a roofer who each blame the other when something leaks. From annual sweep to full liner rebuild, one call covers it all. If you’re starting from scratch and just need routine service, start with a chimney sweep, and we’ll flag anything structural we find while we’re up there.
We also carry a curated roster of professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. Those are the materials certified chimney professionals specify nationwide, and having both HeatShield and DuraFlex on that list means we can offer you a repair option before you commit to a full replacement. Protect your home from the flue up.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. Call (866) 861-1187 for a free estimate and a straight answer about what your chimney actually needs.
Pricing reflects the Rhawnhurst market as of 2026. Chimney Sweep Rhawnhurst offers free estimates – call (866) 861-1187.
Written by the team at Chimney Sweep Rhawnhurst.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Nicole Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Robert Bennett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Michael Anderson