Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Rhawnhurst Homeowners
A fireplace that smokes into the room, won’t light, or smells like creosote is telling you something needs attention before the cold sets in. Fireplace repair in Rhawnhurst covers the parts of the system that sit inside your living room – the firebox, damper, gas valve, pilot assembly, and insert – and it’s the work we do every day as a chimney-only specialist. Our technicians have up to 15 years of experience, and we carry DuraFlex and HeatShield materials for repairs that reach into the flue. We diagnose before we quote, so you know what’s wrong before anyone touches a tool. For same-day help, call (866) 861-1187 – we answer 24/7, with fast dispatch from 7am to 7pm.
What Our Fireplace Repair Service Includes
Every repair starts with a look at the whole system, not just the part that’s acting up. A gas fireplace that won’t stay lit can trace back to a blocked vent; a damper that sticks can be a symptom of a warped firebox. We check the pieces together so the repair actually holds.
Gas Fireplace Repair
Gas fireplaces fail in predictable ways: weak flame, delayed ignition, soot on the glass, or a burner that lights unevenly. We inspect the burner, valve, and venting, then explain what’s worn and what can wait. Because gas work carries real risk, we never recommend a homeowner open a gas line or adjust a valve themselves – that’s a job for a trained technician.
Wood Burning Fireplace Repair
Wood-burning fireplaces take more abuse than any other part of the chimney system, and the firebox, damper, and smoke chamber wear with every fire. If smoke rolls into the room instead of up the flue, or you see cracked brick or missing mortar, the firebox needs attention. We repair masonry joints and firebox panels and check that the flue draws correctly before we call the job done.
Fireplace Insert Service
Inserts sit inside an existing fireplace and need their own liner to vent properly – a common installation shortcut that causes problems later. We service inserts of all kinds, checking the connection to the liner, the surround seal, and the blower if there is one. If an insert was dropped in without a proper liner, we can set that right with a DuraFlex liner sized to the unit.
Damper Repair
The damper is the metal door above the fire that controls how much air moves up the flue. A damper that won’t open fully, sticks halfway, or won’t close tight wastes heat and can let smoke back into the room. We free stuck dampers, replace damaged ones, and make sure the seal is snug when the fireplace isn’t in use.
Firebox Repair
The firebox is the chamber where the fire actually burns, and cracked or spalling brick there is a fire-safety issue, not a cosmetic one. We assess the mortar joints and firebox panels and repair what’s failing, using HeatShield resurfacing where the masonry is sound enough to save. When the damage is deeper than a resurface can fix, we’ll tell you that plainly.
Pilot Light Repair
A gas fireplace pilot that keeps going out usually means a dirty orifice, a worn thermocouple, or a draft problem pulling the flame away. We clean and test the pilot assembly, check the thermocouple, and confirm the venting isn’t the real culprit. If the pilot is fine but the main burner won’t stay on, the valve or the venting is the next place we look.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We install and work with professional-grade products from brands that chimney specialists specify nationwide. That matters for repair work because the right material often decides whether a fix lasts. HeatShield’s ceramic resurfacing system lets us repair a damaged flue or firebox surface without tearing out sound masonry, which keeps the job smaller and the disruption down. DuraFlex liners give us a flexible, insulated option when a fireplace insert or a gas appliance needs a dedicated flue that the original chimney never had.
We also work with Gelco and Olympia Chimney products on caps, dampers, and venting components, so a repair on one part of the system doesn’t leave you hunting for a matching piece elsewhere. We’re not a dealer and we don’t claim to stock every part – what we do is know how this equipment wears and where it fails, so the repair targets the real problem. Whether you have a DuraFlex-lined insert, a HeatShield-resurfaced firebox, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
Some fireplace problems are cosmetic and some are safety issues. These are the ones worth a call before the next fire.
- Smoke rolling into the room. Smoke that won’t go up the flue points to a damper, draft, or blockage problem. It’s also a sign the chimney isn’t venting the way it should, which is worth checking before you burn again.
- Cracked or crumbling firebox brick. Cracks in the firebox let heat reach parts of the chimney that weren’t built for it. This is the kind of damage that gets worse with every fire, so it’s better caught early.
- A gas fireplace that won’t stay lit. A pilot that goes out repeatedly or a burner that cuts off can signal a venting or valve issue. Have it looked at rather than relighting it over and over.
- Soot or black marks on the glass or surround. Soot buildup on a gas fireplace usually means the air-to-fuel mix or the venting is off. It’s a fixable adjustment, but it won’t correct itself.
- Strong creosote or smoky smell when the fireplace is off. A draft coming down the flue can push odors into the house. It often traces back to a damper that won’t seal or a missing cap, and it’s an easy thing to check.
Our Fireplace Repair Process – Step by Step
- 1
We ask what you’re seeing. Before we arrive, we want to know whether it’s smoke, smell, a pilot problem, or visible damage. It helps us bring the right tools and narrow down the cause faster.
- 2
We inspect the full system. That means the firebox, damper, flue, and cap – not just the part that’s acting up. A camera inspection lets us see inside the flue and gives you photos of what we find.
- 3
We show you what we found. You see the camera images and the photos before we recommend anything. Nothing gets repaired without evidence you can look at yourself, and if a repair can safely wait, we’ll tell you that too.
- 4
We quote in writing. The written estimate covers the parts and labor for the repair we recommend. The price is set per job by that estimate, so there’s no guesswork when the work is done.
- 5
We do the repair and check the draw. Once the fix is in, we test the fireplace to confirm it vents correctly and runs the way it should. If the same call turns up something like a worn cap, we can handle that too.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Rhawnhurst?
Most fireplace repairs in Rhawnhurst fall into a few common ranges. A damper repair typically runs $150 – $350 depending on whether the damper can be freed or needs replacing. Pilot light and gas valve work generally lands between $150 and $400, and a firebox resurface with HeatShield usually runs $400 – $900 depending on the size of the firebox and how much surface needs coating. Insert service and liner connection work often runs $500 – $1,500, since it can involve a new liner sized to the unit.
What moves the price is the extent of the damage, the type of fireplace, and whether the fix stays inside the firebox or reaches into the flue. The way to avoid overpaying is to get the diagnosis in writing before the repair starts, with the camera evidence attached. Our estimates are free, and the written estimate sets the final price – there’s no service-call fee on top. Call (866) 861-1187 for an exact quote on your fireplace.
Fireplace Repair Near Rhawnhurst – Our Service Area
We work throughout Rhawnhurst and the surrounding Northeast Philadelphia neighborhoods, including Fox Chase, Bustleton, Holmesburg, Tacony, and Oxford Circle. We also cover nearby communities like Rockledge, Cheltenham Village, Fort Washington, and Mayfair. Dispatch runs 7am to 7pm, Sunday through Friday, and we give you a clear arrival window when you book. For a closer look at what fireplace repair involves in the next town over, our Mayfair page covers the details.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Rhawnhurst
Fireplace repair is the work of fixing the components inside and just behind your fireplace so it burns safely and vents correctly. That includes the firebox, damper, gas burner and pilot assembly, insert connection, and the flue that carries smoke out. It’s different from a routine sweep, which cleans the flue rather than repairing it. If you’re not sure which you need, we’ll tell you after the inspection.
Most fireplace repairs take between one and three hours on site, depending on the part. A damper adjustment or pilot repair is usually quick, while a firebox resurface or insert liner work can run longer. We give you a realistic time estimate when we book, and we let you know if the job turns out bigger than expected. Call (866) 861-1187 to schedule.
Typical repairs in Rhawnhurst range from about $150 for a simple damper or pilot fix up to $1,500 for insert and liner work, with firebox resurfacing somewhere in the middle. The final number depends on the damage and the parts needed, and the written estimate sets the price. Our estimates are free, and there’s no separate service-call fee. Call (866) 861-1187 for an exact quote.
Yes – we install and work with DuraFlex liners and the HeatShield ceramic resurfacing system as part of our fireplace repair work. HeatShield lets us repair a cracked firebox surface without tearing out sound masonry, and DuraFlex gives us a liner option when an insert or gas appliance needs its own flue. If your fireplace already has either product installed, we can inspect and service it. We also work with Gelco and Olympia Chimney components.
Same-day repair is often possible when you call early enough in the day. We answer 24/7 for calls, and dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 861-1187 to check availability.
Our repairs come with a satisfaction guarantee – if something we repaired isn’t working the way it should, we’ll come back and make it right. The written estimate spells out what the repair covers, so you know what’s included before we start. If you have a question about a repair after the fact, call us and we’ll sort it out. Call (866) 861-1187 with any warranty questions.
Clear the area around the fireplace and take up any rugs or hearth decor so technicians have room to work. If it’s a gas fireplace, know where the shutoff valve is, and don’t try to light it before we arrive if the pilot has been acting up. Have a note of what you’ve noticed – when it started, what it smells like, whether it smokes. That background helps us diagnose faster. Call (866) 861-1187 to book your visit.
Schedule Your Fireplace Repair Service in Rhawnhurst Today
Don’t wait for the first cold night to find out your fireplace needs work. Call (866) 861-1187 – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect the full system, show you what we find, and give you a free, no-obligation written estimate before any repair starts. Chimney and fireplace work is all we do, so you get a specialist on the job from the first call. For related repairs, our Chimney Sweep Rhawnhurst page covers the cleaning and inspection side.
Written by the team at Chimney Sweep Rhawnhurst.