Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Bustleton, PA
We provide independent Gelco service across Bustleton: chimney cleaning, Level 2 inspection, cap replacement, crown repair, and liner work on Gelco caps, dampers, and relining components. What makes our Gelco work here different is that we read the masonry first. On Bustleton’s post-war brick chimneys, a failing Gelco cap or an undersized liner is rarely the whole story, and the fix that lasts is the one that accounts for the coal-era flue underneath it. Chimney work is all we do, so we do it right. Call (866) 861-1187. We answer 24/7.
Why Bustleton Residents Choose Us for Gelco Service
Chimney Sweep Rhawnhurst is an independent service provider for Gelco chimney products. We are not affiliated with or authorized by the manufacturer, and we’re straightforward about that. What we bring is familiarity with how these caps, dampers, and relining components actually behave in Bustleton’s climate, plus a specialist’s eye for the masonry they sit on.
We work on Gelco chimney products constantly alongside DuraFlex and HeatShield, matching quality parts that fit your existing flue rather than whatever is close enough on the shelf. Fit is the whole point on Bustleton’s older chimneys, where flue openings don’t follow modern standard sizes. Our technicians have up to 15 years of experience, and every visit starts with a diagnosis before a quote. Clear scheduling, honest findings, and a written estimate that sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Bustleton
These are the Gelco issues we run into most in Bustleton, each tied to how this neighborhood’s chimneys and seasons actually work.
- Multi-flue caps cracking or lifting at the mounting legs. Freeze-thaw cycling on Bustleton’s exposed brick crowns loosens the legs over time, and once they lift, meltwater runs straight into the flue tiles below. We reseat or replace the cap and check what the water has already done underneath.
- Single-flue caps undersized for the coal-era flue opening. A cap that’s a size off leaves a gap at the rim. Rain gets in, squirrels get in, and the gap often goes unnoticed until the interior shows staining. Measuring the actual clay opening before fitting a cap solves it.
- Flexible liner sections clamped rather than sealed at the joint. When a Bustleton home went from coal to gas, some conversions left an undersized or unsealed stainless liner behind. It shows up as a draft complaint on the first cold snap, not as soot. We inspect the full run and seal or resize what’s there.
- Top-sealing damper gaskets stiffening in the cold. Gaskets in Gelco damper assemblies harden through Northeast Philadelphia winters and stop closing flush, so the flue stays partly open when the fireplace is idle. We replace the gasket and confirm the seal actually seats.
- Creosote glazing through the off-months. Bustleton’s short heating season means occasional fireplace use, and the creosote from that sits and glazes between burns. Sweeping that out comes before any reline decision.
Gelco Service in Bustleton: What Local Conditions Mean for Your Equipment
The single most useful thing to know about chimney work on Bustleton Avenue and the side streets: most of these chimneys were built for coal, then re-lined in a hurry when the homes switched to gas. An undersized or unsealed stainless liner is common as a result, and it usually presents as a draft problem on the first cold snap, not a soot problem. That changes how Gelco work goes here. A homeowner may call about a cap, and what’s actually going on is a flue sized for a coal furnace that no longer matches the appliance above it. Add Northeast Philadelphia’s humid summers and freeze-thaw winters, which spall the brick crowns and shoulders, and you get masonry that’s letting water in from the top while the liner underneath is too small to pull properly. We diagnose both before recommending either.
Gelco Models & Products We Service in Bustleton
We service Gelco stainless multi-flue chimney caps, single-flue weather caps, flexible stainless relining kits, and top-sealing damper assemblies across Bustleton. When a component fails, we match the OEM part where it’s still available, because a cap that fits an odd-sized coal-era opening properly is what stops the leak. Generic caps that are close enough tend to let water past the rim. For liner hardware and dampers, the same logic applies: the part has to match the flue it’s going into. A failed cap on sound masonry is a replace-the-component call; cracked flue tiles underneath turn it into a reline-or-rebuild conversation, and we tell you which one you’re in.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Bustleton
Pricing on Gelco chimney work depends on what the inspection finds. A straightforward sweep sits in one range; cap replacement, crown repair, and inspection are separate line items; liner and rebuild work is quoted after a Level 2 inspection shows the flue interior. A free estimate covers the diagnosis, a camera inspection with a photo report, and the written price that sets the final cost. We fix the masonry before selling another cap when that’s the honest call.
- Standard chimney sweep: priced per flue, confirmed in the written estimate
- Gelco cap replacement: priced by cap type and flue opening size
- Crown repair or rebuild: priced by the extent of spalling and mortar damage
- Level 2 inspection: includes camera inspection and photo report
- Liner sealing or resizing: quoted after inspection reveals the liner condition
Call (866) 861-1187 for an exact quote. Estimates are free.
Serving Bustleton, PA – Our Local Coverage Area
We serve Bustleton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Bustleton
Not necessarily. A cracked cap is usually a component failure; the liner underneath may be fine, or it may already have water damage from the gap. We only recommend liner work if the camera shows cracks or gaps in the clay tiles. Call (866) 861-1187 and we’ll inspect before quoting.
That pattern usually points to a draft problem, not soot: an undersized or unsealed liner left from a haphazard gas conversion lets cold air sit in the flue, so the first fire pushes smoke back into the room until the chimney warms. A Level 2 inspection shows whether the liner is the cause.
A Level 2 inspection is the right call when the damper assembly sits above the flue tiles, because it shows the interior condition of the flue and whether the existing liner can take the new hardware. We confirm the inspection level with you before booking.
Often yes. Crown repair on Bustleton’s freeze-thaw-damaged chimneys usually means removing the cap, rebuilding the crown and shoulders, and reinstalling the cap. The liner stays put unless the camera shows it’s also failing. Call (866) 861-1187 for a free estimate.
It’s worth it when the existing cap has cracked at the legs and is letting water into the flue tiles, because that water is what damages the masonry over time. We’ll tell you if the masonry underneath is sound enough to justify a new cap, or if crown repair comes first. Call (866) 861-1187.
Service Areas Near Bustleton
We also serve homeowners in Rhawnhurst, Fort Washington, Mayfair, Holmesburg, Fox Chase, and the wider Northeast Philadelphia area, with the same Gelco-focused service and masonry-first diagnosis in each.
Book Your Gelco Service in Bustleton Today
Whether it’s a routine sweep, a Level 2 inspection, a cap replacement, or a crown repair, we’ll diagnose before we quote. We’re an independent Gelco service provider, not affiliated with the manufacturer. Call (866) 861-1187. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Rhawnhurst.