Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Rhawnhurst Homeowners
A wood-burning fireplace in Rhawnhurst comes with a maintenance chore most homeowners would rather forget about, and that chore does not go away when the weather warms up. Creosote builds up quietly through every fire season, and when fall arrives you want the flue clean and the system checked before the first load of wood goes in. Our technicians have up to 15 years of experience, and chimney work is the only thing they do. We handle everything from a routine annual sweep to liner work, caps, crowns and fireplace repairs, and our technicians carry the tools and the camera gear to inspect and clean the same day. Call (866) 861-1187 and we’ll get a sweep on the schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Sweep Service Includes
Sweeping is the entry point to your whole chimney system, and a real sweep covers more than a brush down the flue. Here is what each part of the job looks like.
Level 1 Inspection
A Level 1 inspection is a visual check of everything you can reach without any disassembly: the firebox, the damper, the flue interior as far as the camera can see, the cap, the crown, and the exterior stack. It’s the standard inspection that comes with an annual sweep, and it’s what we do when your system hasn’t changed and you want a baseline read on its condition. When we run a Level 1 in Rhawnhurst, you get a report of what we saw, not a sales pitch, and anything we flag comes with a photo you can review yourself.

Level 2 Inspection
A Level 2 inspection goes further and adds a video scan of the entire flue plus checks of the visible portions of the chimney from accessible areas, including attics and any hidden chases. You need a Level 2 when the home has changed hands, when a new appliance or a change in fuel type has been added, after a chimney fire or a significant event, or when you want a professional opinion before buying a home in Rhawnhurst. We use a camera, and you get to see what the camera sees.

Creosote Removal
Creosote is the tar-like residue that condenses inside a flue, and it comes in three grades: sooty and easy to brush, glazed and stiff, and the hardened glazed stage that needs chemical or mechanical treatment to break down. Stage 2 and Stage 3 buildup is the reason chimney fires happen, and it’s also why a chimney that fires poorly can start smoking into the room. We remove what we can with brushes and specialty tools, and we escalate to a product like HeatShield’s creosote treatment or a liner recommendation only when the flue condition calls for it.

Soot Removal
Soot is the fine black powder left behind after combustion, and it creeps into places a brush alone won’t clean: the smoke shelf, the damper frame, the firebox edges, and the flue shoulder. A real soot removal is part of every sweep we do, not a separate add-on. We use a HEPA vacuum at the firebox, drop cloths, and containment to keep soot out of your living room air while we work.
Annual Sweep
An annual sweep is the once-a-year cleaning and inspection that keeps your system running safely, and for most wood-burning homes that’s the right rhythm. If you burn cordwood regularly, you may need a sweep more often, and if you burn small amounts of dry, seasoned wood on weekends only, once every year or two is often enough. We sweep the flue from the top down when the roof is safe to access, and from the bottom up when it isn’t, with the same result either way.
Fireplace Cleaning
Fireplace cleaning covers the firebox itself: the walls, the hearth, the grate, the glass on a gas unit, and the surrounding brick. It’s what you need when the unit smells smoky even with the damper open, when soot has stained the front face of the fireplace, or when a gas log set has developed that classic blackened dust pattern on the glass. We clean and we also inspect the firebox for cracks, loose mortar, and heat damage, because a firebox that looks fine from the room can be a problem inside.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
The materials inside a chimney matter as much as the sweeping itself, and we work with a curated list of professional-grade brands that certified chimney pros specify. DuraFlex is a flexible stainless liner system used in relining applications, and knowing how it seats, connects and wears helps us spot problems other sweep-only outfits miss. HeatShield’s ceramic resurfacing system lets us repair a damaged flue without a full demolition, which means we can offer homeowners a real option short of replacement when the flue is cracked but structurally sound. Gelco is a brand we see often in cap and crown materials, and Olympia Chimney is common on the liner and cap side of the work.
When we open up a Rhawnhurst chimney, we’re looking at the flue the way the manufacturer intended it to be assembled, not just whether it’s dirty. That means if your system uses DuraFlex, HeatShield, Gelco or Olympia Chimney components, we know where they tend to wear, what a proper install looks like, and what a repair should cost. Whether you have one of those brands or any other make, we can help.
Signs You Need Chimney Sweep Right Now
Chimney problems usually announce themselves in small ways before they become big ones. If you see any of these, it’s worth getting the system looked at before the next fire.
- Smoke rolling back into the room. If the fireplace smokes with the damper open, the flue is likely blocked by creosote, a bird nest, or a collapsed liner section, and pulling smoke into a living space is a sign the draft has been compromised. Don’t burn until it’s checked.
- A strong, sour smell from the firebox in warm weather. That’s creosote off-gassing as the temperature rises. The smell is worse in summer, and it means there’s enough buildup in the flue to bother your nose even when nothing has burned.
- Dark staining on the chimney exterior or the firebox face. Staining usually points to a leak at the crown or the flashing, or to a chimney that’s drafting poorly and pushing soot into the wrong places. Water and soot work together to rot mortar and rust dampers.
- Visible creosote on the flue walls. A flue with a thick, glossy coating has reached a stage where a standard sweep isn’t enough. Bring us in for an inspection before you burn again.
- An annual sweep that never happened. If you can’t remember the last time the chimney was cleaned, the safest assumption is that it needs one. A sweep is cheap compared with a chimney fire or a liner rebuild.
Our Chimney Sweep Process – Step by Step
Here’s what a sweep visit actually looks like from the moment we arrive to the moment you have a report in hand.
- 1
Walk-through and setup. We walk the exterior first, checking the cap, the crown, the flashing and the stack, then we set up drop cloths, a HEPA vacuum, and containment inside. Nothing gets moved into the room until the suction is running.
- 2
Camera inspection. We run a camera down the flue from the top or up from the bottom to see the full interior. You get to watch the scan on the monitor if you want. Anything we flag is photographed and shown to you, not just described.
- 3
The sweep itself. We brush the flue with the right brush for the material, work down the smoke shelf and damper, and vacuum the firebox and the smoke chamber so nothing is left behind. Soot removal is part of the job, not an extra.
- 4
Component check. We test the damper for smooth operation, check the firebox for cracks or loose mortar, and check the cap and crown for cracks and blockage. If we find something, it’s photographed and priced.
- 5
Photo report and written estimate. You get a report with photos and a written estimate, if any repair is needed, before we leave. No upsells, no guesswork, no verbal-only quotes. If the work can safely wait, we say so.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Rhawnhurst?
Chimney sweep pricing in Rhawnhurst depends on the state of the flue, the number of flues on the house, and how far past a routine annual sweep the job has gone. A typical annual sweep with a Level 1 inspection runs in the range of a few hundred dollars, and a Level 2 inspection with a full camera scan of the flue adds to that. Glazed creosote removal and soot removal on a heavily fouled chimney costs more than a light sweep, because the work takes longer and often needs chemical treatment. If the inspection turns up a cracked flue or a deteriorated liner, a liner or rebuild quote is a separate conversation, and those numbers are always set by the written estimate after we’ve seen the camera footage.
The way to avoid overpaying is to ask for the camera footage and the written estimate, and to be suspicious of any chimney company that recommends thousands of dollars of liner or masonry work based on a verbal description alone. We do not recommend work without photo evidence you can see for yourself, and we will tell you plainly when a repair can safely wait until next season. What affects the price most is the level of inspection you need, the amount of buildup, and whether the flue has damage that requires a repair. The estimate is free, the price is set per job, and every quote is written down before we start.
Chimney Sweep Near Rhawnhurst – Our Service Area
Rhawnhurst sits in the heart of Northeast Philadelphia, and we work all across the surrounding neighborhoods: Mayfair, Holmesburg, Fox Chase, Oxford Circle, Bustleton, Tacony and Torresdale, plus the nearby towns of Fort Washington, Cheltenham Village and Rockledge. If you’re in one of the surrounding neighborhoods, the same team can handle your chimney sweep on the same trip. Where we are is less important than whether we can reach you quickly, so call and we’ll give you the next available slot for fast dispatch from 7am to 7pm.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Rhawnhurst
A chimney sweep is a professional cleaning and inspection of your chimney system, and you need one because creosote buildup inside the flue is combustible and can fuel a chimney fire. A proper sweep also inspects the flue, cap, crown and firebox, so problems get caught before they turn into structural damage. It’s routine home maintenance, and skipping it is one of the most common causes of preventable chimney fires. Call (866) 861-1187 to schedule your sweep.
A standard annual sweep with a Level 1 inspection usually takes about an hour, though it runs longer if the flue has heavy creosote buildup, multiple flues, or if we’re doing a Level 2 with a camera scan. Setup and cleanup are part of that time, because containing the soot is the part that keeps your living room clean. We’ll give you an honest time estimate before we start, and we don’t rush a job to fit a schedule. Call (866) 861-1187 for an exact quote – estimates are free.
A typical annual sweep and Level 1 inspection in Rhawnhurst runs roughly in the low-to-mid hundreds of dollars, and a Level 2 camera inspection adds to that. Heavy creosote removal or a soot removal job on a chimney that hasn’t been cleaned in years costs more, because it’s more work. Repairs, liners and rebuilds are quoted separately after we’ve seen the camera footage. Call (866) 861-1187 for an exact quote – estimates are free.
Yes, we install and work with DuraFlex, HeatShield, Gelco and Olympia Chimney products, along with Famco and Copperfield. That means we can inspect, clean and repair a flue built with those components and quote liner or resurfacing work using the same professional brands. If your system uses a brand not on that list, we can still help, because the principles of a proper flue are the same regardless of the maker. Call (866) 861-1187 to discuss your system.
Same-day service is often available in Rhawnhurst, depending on the day’s schedule and the type of job. We answer 24/7, and we dispatch Sunday through Friday from 7am to 7pm, so most requests can be booked into the next opening quickly. Closed Saturday. Call (866) 861-1187 and we’ll tell you exactly what slot we can hold for you.
Our sweep and inspection work is backed by a satisfaction guarantee, and any repair or liner install we do is covered by the manufacturer’s warranty on the materials, since we use professional-grade brands like DuraFlex and HeatShield. The scope of the warranty depends on the job, so we spell it out in the written estimate before we start. If something isn’t right, you call us back and we make it right. Call (866) 861-1187 to talk through the warranty details for your specific job.
Clear the area around the fireplace, move any furniture back a few feet, and make sure we can reach the hearth without stepping over anything fragile. If your fireplace has an ash bed, leave it – we’ll handle it. If you have pets or small children, plan to keep them out of the room while we set up the vacuum. That’s really all it takes, and we’ll walk you through the rest when we arrive. Call (866) 861-1187 to schedule your visit.
Schedule Your Chimney Sweep Service in Rhawnhurst Today
Whether your flue is due for a routine annual sweep or you want a camera inspection before buying a home in Rhawnhurst, we’re ready to help. Chimney work is all we do, from sweep to cap and crown to liner rebuild, and every job starts with a free estimate. Call (866) 861-1187. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Rhawnhurst.